[jakeyboy100]

Why doe balls just rolll out of my barrle. Is there anything i can do to stop it?

[paintonmeboard]

I have the same problem with my omen......its a closed bolt marker so no detents.....and the paint is too small for the barrel hence the rollouts....a barrel kit or bigger paint should fix it right up.....not sure about any other fixes as in parts or mods.....

[elczaro]

its your paint to barrel match
-being closed bolt have nothing to do with having detents or not

[jakeyboy100]

ok thx

[sleeplessmonkey]

there are no detents because of the closed bolt.... i mean how would that work.... would defeat 80% of the purpose of a closed bolt?

[fAllout_oMen]

you can use "python compression kit", i saw them in the new products section of action puruit games. They are little sized inserts that go into a black "barrel" and it goes between your barrel and gun. Pick a good paint-to-barrel match (with the compressors) and your set to go.

[sdomen]

The balls roll out because they do not like you, and are afraid of being hurled through the air only to be splattered on some poor kids gogs. How would you feel if I shot you out of a barrel at 300 fps at some poor kid... That's what I thought.

[igotfriendsjk]

get a freak and freak kit then u will always have ball to barrel match

[harnett]

with a closed bolt there is no detent the balls stay in the end of the barrel and is what works as the detentso you need a good paint to barrel match to stop the paint from running out the end of the barrel. the best barrel is found for the omen is the evil pipe. that is what i use on my omen and works great
for speedball and recball.

[reloaded689]

get a freak kit also you could just live with it as it will ether roll right out of the barrel or just a littel ways down and be pushed out with the next shot (unless you have the psi way up wich is not good for an omen any ways) thats what i do when i'm to lazy to change my instert

[bballryand316]

im not too educated in this section: but whats detents and closed bolt?

[spaceman2141]

detents are what keep the ball in the breach. closed bolt is like autocockers and omens, the bolt is closes off the breach when just resting. open bolt like everything else, you can look down the feedneck and see that the bolt is not necessarily seen.

[bballryand316]

what are spyders?

[spaceman2141]

they are an open bolt blowback

[bballryand316]

ok thanks, but i downloaded the manual, thought it was omen 2.0, but it just says omen
Will it be the same as the 2.0?

[spaceman2141]

yes, it should be fine.