[MatrixWI]

Please will someone make an ultimate sticky for the PMR. As I write this there are 17 PMR threads on the first page of the Dye forum alone, 8 of which are asking the exact same questions. I’m getting tired of sorting the threads of people who really need help from the treads of people to lazy to check the 100 other threads on the same thing.

Please!!! Thank you.

[XTC.Leprechaun]

theres enough info in the ultimate sticky already people just don't know how to look. idk if a ultimate sticky NAMED PMR would maybe draw their attention or if they will just overlook it like they are already doing. but i agree that there are WAY too many threads about the pmr asking the same questions...

[larrylaroo]

are you smoking??????????? there is like nothin in the ultimate sticky on the pmr

[threeham]

Clearly you're the reason for posts like these.

[erayser]

Originally Posted by larrylaroo

are you smoking??????????? there is like nothin in the ultimate sticky on the pmr

There are like 3 PMR threads in the sticky. I created the PMR Troubleshooting thread.
imo... I still think there should be a separate sub-forum. But the real problem is most people don't look at the sticky first before posting their question. I think we would have the same problem with people not looking at the sticky first if there was a PMR sub-forum. Maybe... the ultimate sticky should have a PMR heading so PMR users don't have to look so hard to find PMR related threads?

[xkpxfatassxx]

there should be a FAQ PMR in it also

[MatrixWI]

Originally Posted by erayser

I think we would have the same problem with people not looking at the sticky first if there was a PMR sub-forum.

Your right.

Originally Posted by erayser

Maybe... the ultimate sticky should have a PMR heading so PMR users don't have to look so hard to find PMR related threads?

At this point anything would help.

Where are the Mods?? We need new stickys!!!We need a sub forum!!!

[gremlin75]

Originally Posted by xkpxfatassxx

there should be a FAQ PMR in it also

Not that anyone will actualy look at it but I'll try to have an faq up later today....unless erayser beats me to it...lol

later
gremlin

[erayser]

Originally Posted by gremlin75

Not that anyone will actualy look at it but I'll try to have an faq up later today....unless erayser beats me to it...lol

later
gremlin

What? a separate sub-forum? haha j/k

[MatrixWI]

Originally Posted by gremlin75

Not that anyone will actualy look at it but I'll try to have an faq up later today....unless erayser beats me to it...lol

later
gremlin

Thank God

[threeham]

What? A new sub-forum?

I bet gremlin will win.

[gremlin75]

Originally Posted by threeham

What? A new sub-forum?

I bet gremlin will win.

Oh god Im going to start beating people over this sub forum thing...lol

and dont bet to much on me. Im tired, i've eaten way to much today, and Im getting tired of closing or deleting all the damn vs threads so I probably wont do anything till the mornining

later
gremlin

[gremlin75]

OK so I stoped being lazy...Now what questions does everone want to see in the pmr faq? So far I have

Q: What is the PMR?
Q: How does it work?
Q: What is the operating pressur of it
Q: Does it have an LPR
Q: Is it made of plastic?
Q: What barrel threading does it take?
Q: What feed neck threads does it take?
Q: What modes does the board come with

Edit: added
Q: Will there be a UL frame for it?
Q: When will more colors be out?

[CrazyLittle (Banned)]

What kind of tank should I buy HP or LP?
What upgrades should I get for it?
What kind of efficiency do you get with a PMR?
Does the PMR have kick?
What's the first thing I should do with my PMR after I take it out of the box?
Help I'm too stupid to read the manual and my PMR is leaking out the X/Y/Z!
When will the color PMR be released?
When will the UL frame be released?
When will the (xyz) upgrade be released?

can't think of any other "F"aq's.

[gremlin75]

OK but what kind of efficiencey is the pmr getting?

[CrazyLittle (Banned)]

standard answer should be 1350 off a 68/4500, as stated in the PMR review thread.

[gremlin75]

Originally Posted by CrazyLittle

standard answer should be 1350 off a 68/4500, as stated in the PMR review thread.

Gracious

Here is what I Have thus far. Any corrections you guys see that need to be done or any other questions that need to be added?

Q: What is the PMR?
A: It is the Proto Matrix Rail.

Q: How does it work?
A: It uses a "boost" foward design

Q: What is the operating pressur of it
A: Approximately 140psi

Q: Does it have an LPR
A: No it does not

Q: Is it made of plastic?
A: No the body, reg, VAA, and bolt are all made of aluminum. The trigger frame, trigger, eye covers, and bolt cap are made of a strong Polymer

Q: What barrel threading does it take?
A: Cocker

Q: What feed neck threads does it take?
A: Matrix

Q: What modes does the board come with
A: All standard tournament programming modes are included

Q: Will there be a UL frame for it?
A: Yes

Q: When will the UL be released for it?
A: Some stores already have it lised for sale but the actualy release date is unknown at this time

Q: When will more colors be out?
A: Rumor has it early 2007

Q: What colors will it come in?
A: At this time black, blue, olive, and red

Q: What kind of tank should I buy HP or LP?
A: Either will work

Q: What upgrades should I get for it?
A: None should be needed but people do suggest a new barrel and Metal bolt cap

Q: Will there be any aftermarket board for it
A: Yes. The pmr uses the same board as the pm7

Q: Do any dm or pm triggers work on the pmr?
A: No it uses its own trigger design

Q: What kind of efficiency will it get?
A: Approximately 1350 off of a 68/4500 tank

[erayser]

I win.

EDIT: GREM BEAT ME. But mine looks better... hehe

Let me know if you want me to make a thread...

Contacting Dye:

• Dye's Phone Number: 1-858-536-5183
• Dye's Email's: service@dyeprecision.com , guntech@dyeprecision.com

*******************************************
DM's and PM's run just fine with either LP Tanks or HP tanks. Neither one is better.
*******************************************

PMR07 summary:

• Matching single piece Proto barrel
• Hyper2 in-line air regulator
• Anti-chop eye system
• Composite eyeplate
• 150psi operating pressure with Boost Forward technology
• Continuous three-dimensional contoured body design
• Compact and lightweight body styling
• Proto dual-durometer sticky grips
• LED program control
• Dual-durometer composite ergonomic 45 grip frame
• Re-engineered 1 piece bolt system
• Adjustable dual-durometer trigger sensitivity and rate of fire
• Stamped metal insert logo
• New Proto bottom line
• Adjustable locking dual-durometer feedneck
• No UL frame but one will be made specifically for the PMR.
• No LPR.
• 3 firing modes (Semi, PSP, and Millennium)
• 1.22 without reg, barrel and battery. 1.94 pounds with everything.

NEED PMR HELP!:

• First thing to do is Read the MANUAL
• PMR Troubleshooting Guide

Knowing Your PMR Marker:

• Again, Read the Manual
• PMR Disassembled
• PMR Review and FAQ's
• PMR Information, Weight, and comparison to DM/PM guns
• Is the Bolt the same as DM/PM's: NO. It uses the new patented Boost forward bolt. Pics in PMR Disassembled link above.
• Does the Does it have an LPR: NO. There is no need for one with the new designed Boost forward bolt.
• What barrel threading does it take? Cocker
• What is the barrel length and bore size? 11 inch. .690 bore.

How To's / Modifications:

• How to Install a Pulse RF chip on a PMR

PMR Maintenance:

• How To Clean/Replace O-Rings/Relube Hyper2

PMR Upgrades:

• PMR Upgrades from Proto catalog
• What triggers work on the PMR
• Where can I find a PMR UL frame or other upgrades?

[gremlin75]

Originally Posted by erayser

I win.

EDIT: GREM BEAT ME. But mine looks better... hehe

I may have beat you but you win. Post that **** in its own thread and I'll add it to the sticky. Nice work again bro

later
gremlin

[faztfood619]

can u make a pmr pic thread

[gremlin75]

Originally Posted by faztfood619

can u make a pmr pic thread

No

later
gremlin