Hmm, I'd say so. Axe would be about $350 I'd bet with that stuff. Rotor should be $80-120, depending on version, color, and condition. And then mask and pants would be about $100 total.
Anyone else have input as to which is a better deal?
Axe is a better deal and in my opinion a better gun. Easy and simple to maintain. Also if you have any issues, kee sends you new parts. Plus they shoot amazing and you get all those barrel sizes.
I would go for the AXE as well. etek 3s are loud cheap versions of egos. and the AXE is a solid marker. I cant agree with the guy a couple of posts back talking about the mini is a great marker too. I see minis go down every weekend at my home field. I have yet to see someone sitting a game out trying to fix their AXE. . I cannot say for sure if the AXE clicks or not, haven't played around with one enough to notice. If you want to know a good pressure look up a AXE manual online and see what the recommended pressure is. If the gun looks close to brand new, than it is probably good to go. Maybe just need to open it up and clean and lube the bolt system and drop a fresh 9volt.
Good luck and I hope you get the deal!!!
I think you can use any pressure but I use low pressure so I don't have to change when I use my g6r. My brother uses only hp though. The reg should read anything under 200 psi when you air it up. The delrin bolt requires a lower pressure setting on the axe's reg. To dry fire air up the gun. Hold the trigger while pressing the power button to power the gun on with the eyes off. If you want to make sure the eyes work just press the power button and drop your finger into the breach and the led light on the gun should turn from red to green, but make sure you don't pull the trigger as it will destroy your finger.
.
Your Privacy Choices