PM me with any questions. Everything works unless noted otherwise. I can take more pictures of anything if needed. I prefer paypal.
for the stuff that is on ebay, my ebay name is rridgeway989
BARRELS
-> smart parts stainless steel freak back for SFT, 3 inserts, and a 14" AA front - $55
or $23 for back
$10 for each insert
$13 for the front
HOPPERS
-> Vlocity Jr, brand new black shells - $55
CLOTHING
-> Empire Pants, L, very good condition - $30
-> Dye pants, size XL, knees were just sewn up - $40
REGULATORS
-> gloss black CP short reg - $40
-> two stock WGP regulators, gloss black - $10 each
TANKS
-> 68/3000 steel Crossfire tank, good condition, made in '02, out of date
-> 9oz co2 tank, made in '99 it seems
-> 20 oz co2 tank, pure energy with on/off valve, made in '02
GUNS
-> Spyder Aggressor body, Excel barrel. some scratches but in good condition. picture taken with the bolt and rear adjuster removed. frame is sold
STUFF SOLD
-> bob long 0-1200 psi
-> spare Impulse gasket
-> eblade 2 set up v1.10, frame, board, eye & cover, and solenoid
-> stock short detent for Impulse
-> maxflo old style regulator. Currently has a broken guage on it but I will put a plug in its place if you want
-> 05 ego blue and grey with some sort of barrel, star frame, nexus bolt, an un-flashed Tadao board (goes down to 14, blue LEDs), ndz on/off with cp rail, blue laser eyes.
-> incomplete Trilogy, drilled for eyes, needs ram, detent, bolt pull pin and timing rod
-> Impulse
-> Vertical Adapter with PRV. no gauge and has one scratch
-> brand new bob long gauge, 0-300 psi
-> smart parts 0-300 psi
-> Green 2k4 body, not drilled for eyes, bolt in this one is either aftermarket or modified, it has holes drilled in it to make it a lot lighter
-> Gloss black 2k4 body, drilled for eyes
-> Storm frame
-> Empire Ground Pounders, L
-> stock gloss black 2k4 frame
-> Dust Black 2k2 body, not drilled for eyes
-> Empire Reloader 2, smoke shells
-> PMP pump kit, 2k+ threads
-> red Hybrid Hedlock autococker feedneck
-> Red RT Automag - It is red and like new. I came to find out that it has never actually been played with. Has a benchmark frame and a smart parts barrel. It will comes with a parts kit, stock barrel and the front grip and sight rail with the line
-> dye 0-1500 psi
-> Vlocity, like new light blue shells, gangstar chip
-> Dye C7 jersey, XXL, blue, this is like new
-> Dye gloves, C7, size Large, left glove has some ripping in the palm
-> JT jersey, XL
-> PM8, clear, FS only
-> 4 oz tank, no label, made in '99 but these never need to be hydroed
-> Zeus G2 - this is like new, will come with holster
-> Standard Revvy, black shells - $15, the battery door has a small bit missing, pm me for a picture
-> PMI regulator
-> 68/3000 carbon fiber Bulldog tank. good condition. made in '02
-> 45/4500 carbon fiber wrapped tank. i believe it is a 5 year, i just had it hydroed 12/06. the regulator is scratched as well as right where the regulator goes into the bottle
-> 114(?)/3000 carbon fiber Air America tank, out of date. i don't know where the attachment is for it and i don't know if it works at all. last hydroed in '02 but was made in '97. Sold as is
-> ndz Long detent
-> Spyder 32 degrees 9 piece spring kit
-> brand new Dynasty NXe pack, 3+4. just been sitting in my closet
-> ANS regulator
-> Mantis 3+2 pack
-> Empire jersey, L
-> CP regulator
-> Pure Energy regulator, 4500 psi. i put a myth on my tank and don't need this anymore
-> Sanchez SM-1 barrel with one insert (.686)
-> RADARchron
-> milled imp body, the solenoid screw part is stripped. Filled down for WAS eye (will work with normal eye still). just the body, no internals, feedneck, V/A, or detents come with it, i have more pictures
-> NXe tank cover, 68cu
-> big KAPP drop and on/off combo
-> KAPP gas through
-> i have a spare ego exhaust valve from an exhaust valve kit. just bought it and i don't need the other one
-> supafly / superfly bolt and pin
-> blue Hybrid Lady grips
-> 05 ego
-> PMR w/ UL frame
-> SP Ion with custom body
-> worrframe (select fire frame) not the trilogy one, also has solenoid adapter thing on it. a palmer's LPR and an Eclipse ram with two Eclipse QEVs
-> RAM. mounting the Eclipse ram onto the trilogy required some of it to be sanded down, notable the base of it, so that it can screw onto the gun. left QEV is black and right is chrome, but i have another chrome if you want them to match
-> V2 Ripper Frame. essentially an Angel ir3 frame for you imp
-> Ndz lpr combo. this thing is practically new, i still have the box
-> W.A.S board with eye and eye cover, newest version, I have the computer cable but wires came out of connecter
-> ndz rip valve
-> dye c4 pants, size L. great condition
-> impulse/ion threaded dust freak back with one insert (green insert, .691)
-> freak front. 14”
-> solenoid that had the wires broken off
-> ram with brass hammer
-> stock ram assembly
-> evil bolt
-> stock body, I’m assuming everything with it works, sold as is since I don’t know for sure
-> ndz clamping feedneck. scratches shown in pictures