[LlamaRama]

I've got a hot deal in the works, but a crummy image to work with.



I don't know if imgur allows hotlinks, so here's the link

http://imgur.com/7tFHmKP

If anyone could identify this cocker really quickly, I would love you.

Also value would be nice, but not necessary.

[bac0n]

System X Vengeance. Maybe worth 100-150?

[tacxplosion]

Vengeance 4.0 and yes somewhere in the $100-$150 range depending on condition.

[LlamaRama]

winners! it is. picked it up for 75. couple dings but thats it. thank you so much. i was able to do some research in time

[Vegard]

$75 isn't a bad deal I'd say, not much to be made in flipping it; but for a tinkering/loaner it's spot on.

[LlamaRama]

I've always wanted a cocker, i already got tons of spare parts. No leaks, worked until I took it apart to clean it. (I knew that would happen though. The haiku is sacred.) Now I gotta figure out what the hell i'm doing.

Anyone know which way the LPR decreases pressure?

[Brad- Division]

Looking at it ... (Barrel in face)

Clockwise Up
Counter clockwise down..

If there isn't an issue with it, you should unscrew it almost all the way, hold the trigger down and slowly turn it until it cocks, then a half turn more and you should be good.

PbNation Ninja edit *** assuming that you have the gun aired up there is no leak and you have no paint in the gun then you should be safe!

[LlamaRama]

Originally Posted by Brad- Division

Looking at it ... (Barrel in face)

Clockwise Up
Counter clockwise down..

If there isn't an issue with it, you should unscrew it almost all the way, hold the trigger down and slowly turn it until it cocks, then a half turn more and you should be good.

PbNation Ninja edit *** assuming that you have the gun aired up there is no leak and you have no paint in the gun then you should be safe!

Thanks. And safety is always number one