[p8ntball4life14]

Ok, I just got my creed the other week. Took it out of the box and it worked great. Just because it was used I wanted to clean and relube the regs. Now after I aired it up I noticed a small leak, but the gun still cycles fine.

I took off the grip frame and then aired it up again and noticed that the leak was from the back hole on the solenoid. I reset the regs and made sure it was not too much pressure, or too little... But it still leaks .

I don't really want to send it off for work, but it is what it is. I also have a tournament this weekend and was pumped up to use this thing this weekend. So any help would be great!

[DemoBaker]

sounds like it could be a gasket. speak to shootnpoo he will hook u up

[MstrKey]

If the leak is coming from one of the holes in the noid, it could simply be that you need a new rammer oring or rear valve orings. A gasket problem would leak around the outside of the noid.