When I turn on my marker I have to pull the trigger multiple times before the bolt fires. As long as I keep firing its fine. The longer the time between trigger pulls the more times I have to "charge it". Any one else have these issues? Is it just a dwell setting? I was messing with the settings when this happened and now I have reset board to default settings and it still happening. Any help would be appreciated. Thanx
Well I turned up my LPR and for the most part that seemed to work. I still had a couple instances where after the first trigger pull the bolt moved enough to put a ball in the barrel. Then i had to let it fall out so I didnt have to shoot through it. It is not the battery as I alreay tried that, but thanks for the mention. And I have a APE board so there is no FSDO setting. I will mess with the dwell though. My team did place second today in a 7 man woodsball tourny, so it worked well enough for that.
If you have the APE board, you do have adjustable anti-bolt stick. On the original APE board, it is found under the marker control setpoints, and is referred to as bolt stick dwell. On the Gen 4 boards, it is referred to as anti-bolt stick dwell.