[KillerRod]

as the title says, the solenoid on my dm4 is leaking. It is leaking on the side with the solenoid wires attacthed. Am I totally screwed or is there a possible gasket/o-ring that could be bad? Also, I am calling Dye tomorrow to see if this can be a cost-free fix, or something like that. Any help is appreciated.

No I didn't over pressurize the gun, I think the hyper2 might've crept or something. Gun's fine 1 min, down the next min. BTW it still cycles fine and what not

[backyardpaintball]

take out your on/off and check the orings it is probably coming from there

[ckyfann72192]

it could be your noid screws call dye they'll send you one for free they sent me a free full package of them

[Abhinay]

tape it


LOL!


jk yeah call dye say this "send new solinoid to ME now!"

[KillerRod]

not the On/Off. If it was that, the title wouldn't be Leaking Solenoid. Anyways... I found new Solenoids for 40 bucks shipped, so I ordered one. I am going to call dye tomorrow and talk with a tech about my leaky situation.

[empire_049]

id also say try the bolt sail o-ring in the middle of the bolt... look at that o-ring

[MackyGOG]

Yeah, its always funny to hear my solenoid is leak and ends up being a 2 cent o-ring. Replace the #15 Oring on the bolt sail and all should be good.

[KillerRod]

thanks for the help... I talked to dye today... I need to replace the 15 oring... or it'll leak outta the solenoid milled holes in the body. Unfortunatly I purchased a new solenoid last night.

If you have an actually damaged solenoid hit me up, I gotta useless one on its way.