[SNAKESNIPER (Banned)]

Originally Posted by FallenHero_08

doesnt look anything like a dragon head in the first place...

Just saying.

It's based off the "Dragon G6R".

[Desperado_Ghost]

I wish the dragon G6R looked like the CAD design they had originally

[Nolan Clemons]

Originally Posted by stevebski

I like it. In no way do I think "Mr potato head" or "retarded cousin" when I see this. I actually think the flames needed more done to the front and the Dragon back looked okay but this is the best of both. It's only logical somebody did this. Might as well be Bob. get some really awesome masking on that and color the flames and dragon in a fade while the back were say, nickle plated, that would be sick.

"be original"...

Forgot the dodgy. Let's look at the history of factory custom milled markers. Shockers are gone. That leaves PE right? Let's change one line or mill a teeny tiny logo into it. BAM! Holy **** that's game changing! Revolutionary!.. Bob is the only manufacturer not to get stuck in vinyl graphics but actually mills his guns at the factory. I'd say that's original enough.

i agree to the statement about how Bob is the only guy still doing real factory custom work, but that gun is simply what i said it is, a potatohead. They borrowed the front of the dragon, and the back of the flame, and screwed them together. I would have rather seen another new cut, not a combination of two existing ones. More options, means more wide spread appeal which leads to more sales. It's still a good looking marker, but it is just a simple part swap.

[specopsdeath2]

Originally Posted by Nolan Clemons

i agree to the statement about how Bob is the only guy still doing real factory custom work, but that gun is simply what i said it is, a potatohead. They borrowed the front of the dragon, and the back of the flame, and screwed them together. I would have rather seen another new cut, not a combination of two existing ones. More options, means more wide spread appeal which leads to more sales. It's still a good looking marker, but it is just a simple part swap.

Agreed. To an extent. It is a part swap. But it also gives more options for consumers, while making it so BLAST does not have to design and mill another cut. Will there be another cut? Most likely yea there will, a few others if my guess is right. I love it. Glad someone decided to do it and saw it flowed fairly well together.

At this point, I wonder it someone can order a g6r with "____" back and "____" front from any/every cut they do. Now that would be pretty cool

* cough cough TIM cough cough *

<3

[disturbed989]

Well the dragon is the only one with a different front iirc.

[papaintballer15]

Originally Posted by disturbed989

Well the dragon is the only one with a different front iirc.

Correct

[gamer565]

Originally Posted by disturbed989

Well the dragon is the only one with a different front iirc.

Originally Posted by papaintballer15

Correct

Nope.

Flame, Dragon and Tactical..

[papaintballer15]

I doubt anyone would be wanting to put a tactical front on another style back. Same way with flame as it wouldnt flow with anything I actually wished each one had a different front. If my tx storm had milling on front that went along with the back it would have been even better. Not taking anything away though bc milling is great on all them

[bleeding_through]

I feel like the feedneck lever and ram cap should trade colors...

[randomdean]

Phoenix? No it's just a dragon that ate taco bell and is now ****ting out flames.

[papaintballer15]

Mmmm taco bell.... How I wish there was one close

[Team Live Wire 911]

Originally Posted by BabyFace

I guess its a "Dragon Phoenix" then..

Cool gun, regardless. CAD guys got lazy and didnt want to design a new head for it clearly.. lol

Nothing to do with cad designers....it's just a dragon g6r front and flame back. Not extremely hard to do just pricey do to need two guns or the front half of a dragon and half of a flame. Looks cool though

[dominantgazelle]

looks sweet!

[MaG Adrenal1ne]

Not too shabby.

[LUXEflipYO]

Originally Posted by specopsdeath2

Agreed. To an extent. It is a part swap. But it also gives more options for consumers, while making it so BLAST does not have to design and mill another cut. Will there be another cut? Most likely yea there will, a few others if my guess is right. I love it. Glad someone decided to do it and saw it flowed fairly well together.

At this point, I wonder it someone can order a g6r with "____" back and "____" front from any/every cut they do. Now that would be pretty cool

* cough cough TIM cough cough *

<3

at cup i asked bob long if i could get a dragon front and flame rear, he said yes...well 2 months later blast releases it...it can all be done, it just costs money...

[RogueShooter]

In all honesty I like it a lot better than the dragon or flame guns by themselves... But it's still not something I'd own.

[mrpresident2107]

Hands down my favorite G6R look thus far! Wish I had 1400 just laying around...

[LUXEflipYO]

Can't wait to have mine in a few weeks

[tranman]

Flaming dragon...sounds like a Kung Fu technique

[Henrybg]

Originally Posted by SNAKESNIPER

Neither is Doctor Octopus, I don't see anyone drawing him with sixteen arms.

stick to your axe if you can't appreciate superb milling

[SNAKESNIPER (Banned)]

Originally Posted by Henrybg

stick to your axe if you can't appreciate superb milling

I can appreciate "superb milling", but this "brand new gun" is just two old guns' parts stuck together and re-annoed. Whatever makes the rabid BL fanboys happy, I guess.