ok so when i flip the asa on empire axe it leaks from every were then i flip asa off then back on and it pressurized with no leaks but then i when im done and unhook tank and leave gun for ten hours does the same leak thing again!!!!!im not happy already sent to empire they sent it back with out fixing it
Man if they didnt fix it I would be back on the phone with them and sending it back, I know its frustrating and a pain but if they were supposed to fix it...back it goes. IMO
it sounds like it comes form trigger and asa i think but im not sure i know its not poppet seal cause i can only test it every ten hours it seals after the first loss of air
if it comes from the trigger area it's probably the connection between the air tubes. Try switching the o-ring between the tubes.
If its the asa I assume it's the bottom of the asa where the lever is. Drop some paintball gun oil in to the depression pin area to allow it to glide easier.
One, use punctuation and grammar. It makes it a hell of a lot easier to read and understand you.
Two, WHERE is it leaking from. "Everywhere" is close to impossible, as that would basically mean every single oring in you marker is wearing out at the same time (Not completely impossible, but extremely improbable).
PINPOINT where exactly the leak is coming from. Chances are it's either your poppit not sealing up properly the first time, a dry/wearing out transfer tube o-ring, the solenoid o-ring, or the bleed valve isn't quite resetting properly. Once we know WHERE the leak is (air it up and feel around quick, find where the air is coming from), we can better help you fix it.
As to why it does it again after sitting for so long, lube will dry slightly, orings shrink a little, everything just settles back down.
__________________
Dust Black Axe w/ white accent
14" Freak Kit
Spire with CrownSF
Crossfire 68/45 w/ Stealth
i hear a big pop when it does seal?? anyone else hearing it to .This is so annoying i have to not have a tank inserted for two days before it does it again.
i just lubed cleaned and lubed every dam oring on gun changed entire poppet. Im going to wait two and a half days then check again if i still have problems im calling empire...good thing i bought two axes..... by the way just call kee action sports there customer reps are dope
had the same problem which started in the cold the pressure release valve on the air tube in the grip doesn't seal. I called Kee and they sent me a mini tube without the hole. Haven't had an issue since then.
__________________
Charm City Chokehold
Main Marker: Ego LV1-Dye Rotor-Ninja SL 68/4500 with Ninja V2 SLP Pro reg
Back up: 2k12 Flame G6R-Virtue Spire-Ninja 45/4500 with Ninja SLP Pro reg