68/3k on timmy?

ballbusters86 · 08-19-2001, 04:02 PM

how would a 68/3k tank work on a timmy? what brand too? thanks

Vern1 · 08-20-2001, 07:46 AM

Greetings,
If you use a 68/3000 preset, I would suggest an in-line reg to gring the pressure down to about 500 going into the marker.
You should get about 800 to 1000 shots from this setup.
If you want LP, install a Gladiator or Stabalizer or Vigilante in the ASA, do the LP mod and you will get 800 or more shots from the same tank.

ballbusters86 · 08-20-2001, 06:05 PM

ok thanks, i think i will be getting that lp mod from you next time i am at your fieldand i may just end up getting a 68/45 centerflag preset.

CountyPaintball · 08-21-2001, 11:14 AM

I used a 68/3000 adjustable on my Timmy. Worked great. I set the tank's output pressure to about 500psi. I shot 2 cases (4000 rounds) and had to fill the tank 3 times. I filled it a 4th time near the end of the day, but hardly used any of that air to finish off my paint. I guess technically, you could say I used about 3.5 tank fulls to shoot 4000 rounds.

We have the Centerflag 68/4500 presets in stock now. Just got them yesterday.

Mike