we are now selling Adjustable trigger kits for the rainmaker. the kits cost $25 shipped and there is nothing like it on the market.
Trigger kit: This trigger kit was made by the people of Modified Paintball Products (MPP). This trigger kit was made to be a plug and play upgrade to the 98 or 99 Rainmaker regardless of what board is installed. It consists of a microswitch mounted to an adapter plate made of delrin. It is already properly wired and insulated to plug directly into the existing harness in place of the stock trigger switch. It's intention is to accommodate both stock triggers of the Rainmaker; single or double. For this, a special component has been meticulously machined on a CNC mill in order to give exacting tolerances and perfect fit. This trigger component consists of a white delrin trigger switch contact and a delrin pin. It has a ss screw which allows unlimited adjustment forward or back of the trigger; the trigger pull. Installation of this Trigger kit should take no more than 5 minutes assuming you know what you're doing. Adjustable Triggers made completely of aluminum will be out in the future and will work hand in hand with this kit. For those who still have their stock triggers, you're in luck. Just pop in the stock trigger, and you're in business. The pull of the microswitch is less than .5 mm by nature of the switch itself. This can be further shortened with the use of the screw mounted in the trigger component. A full auto effect can be achieved by applying the appropriate amount of pressure on the trigger and allowing the gun's recoil to bounce the trigger. Pressure is still applied to the trigger in this scenario. It may take a little to become accustomed to the more reactive trigger switch and it's rapid fire potential. Learn the new characteristics of it and kick some serious ANGEL butt.
i can answer any questions that you may have
if you would like to purchase an item please email me at
cujdik@hotmail.com
Your Privacy Choices