From your experiences, what's the best psi to use with the luxe? I was using 450 psi, but only shooting around 270-280 fps. Gonna try 550 psi this weekend. Also, does efficiency suffer with a higher psi?
I've heard several people, including the tech's at Ninja, say that 550psi is the optimal pressure for Luxe markers. It doesn't matter which version either. Hope that helps.
As per Rob@ninjapaintball, 550psi is what they found to be the optimal output pressure needed for the luxe to cycle properly. The luxe will run perfectly fine on high pressure, but a mid pressure would be easier on your reg *not as much work needed*. A lower output pressure in theory would give you a few more shots per fill but if you want to save yourself a few bucks, just use your standard adjustable reg and just remove the shims as needed. I think if you just leave one red one in, you'll be sitting at about 600psi. shoot rob a pm, he's always more than willing to help out.
You tank reg will not meaningfully effect efficiency. You can shoot the tank down lower before the imput pressure for the inline regs drops (causing velocity to drop) but the effect is VERY minimal.
__________________
DBS FLOOD
Formerly of DBS Kidz 2, DBSPaintball.com and DBS Titans
Your Privacy Choices