[snicklfritz]

I recently helped my friend get an e-blade and are having troubles getting the gun working properly. gun was in 100% working order before installing.
Had holes drilled and tapped by professional machinists...
we get the gun to a point where it sounds ok and fires ok but as soon as the eyes are turned on it sounds and fires like crap...
any suggestions on where to start?

[gamer565]

Start by checking that it's timed correctly.

[xsvdynastypballa]

set board to defaults, Make sure your eye is working....post a pick of the eye hole.

Also going to need a good hopper if you wanna shoot like a bat out of hell.

[hmcl281]

you dry firing with eye on. this might be better in the e cocker section than the void warranty one?

[EvilAuthorityX]

are you shooting it with paint?

[snicklfritz]

Originally Posted by xsvdynastypballa

set board to defaults, Make sure your eye is working....post a pick of the eye hole.

Also going to need a good hopper if you wanna shoot like a bat out of hell.

Ill post a pic of the eye up when I get out of work today but the gun was timed before we started and was reading the manual online going to all the starting setting #s. Also we were using a halo v32 feeds my ego and DM pretty we'll so shouldn't be the hopper.

[Asmith1987]

cid63CF79B-883D-4A0D-9461-AB31C67B2F9E

[Slynch]

is that a code for PS2

[bonusball024]

What specifically does "sound and fires like crap" mean?

[Fat_Joe]

Yea, video would be needed to properly diagnose the issue. Its been seriously like.....9 years since I've dealt with this but I couldnt begin to help with vague text.

[tonyneedspills2]

maybe bring it into a gun to tech to make sure it works 100 percent rememeber here on the void warranty anything is possible with time and money.