[smiles77]

had to move the front block on my 2k3 to my brothers 2k1 since his broke and i don't use my cocker anymore, works fine....as long as i cock it manually, any tips, ideas? i just cant get this thing to autocock for the life of me.

[ohya23]

definatly has to do with timing. Is ithe backblock moving, is air leaking from anywhere? Need more info to give you better help

[smiles77]

it was leaking from the 3way, but take down and rebuild with a bunch of lube and some shots with air fixed that, i can cock it by hand and it fires a solid shot (not tested with paint). other than that, it just doesn't blow back again...its almost as if it were a pump atm, but not...sorry if this is vague idk quite how else to explain whats going on.

other than taking it down again im not sure what else could do it. the tank im testing has ~1000psi left, would that do it? not getting fed enough?

[Rebel_816]

sounds like the 3 way is out of time. it probably needs to be adjusted outwards a little.

[OSOK8541]

When you air it up, is it really hard to pull the block back?

You may have to reverse hoses 1 and three. Depends if the marker is hinge or.....not.

I had a similar problem. I flipped the hoses, then timed the marker and it works flawlessly.

[smiles77]

yeah, timing is just a painful process. its my 1st time. idk how its so far off. any times to finding the time faster?