DLX Luxe O-Rings (LISTED)

OLD_B4LL3R · 11-15-2010, 07:50 AM

Hello, First I can not take credit for this list. This list was provided to me by Don at DoodleBugSportz (www.doodlebugsportz.com) Great Guy!

All I did was clean the list up a little and made the Urethane and HBNR orings stand out a little.

I am trying to get a CAD cutaway view next so that I can call out all of these orings on it, so that we can use it for reference.

I'd appreciated it if a MOD added this to the Luxe Sticky - as I know it will help us new guys out!

(EDIT: 9-6-13 This one is not the one I created, but essentially is the same. Added to first post for help)

Hope this helps!

.

**FallNAngel** · 11-15-2010, 08:23 AM

Added a link into the sticky. Ydna already has a diagram for the firing assembly on his website (www.zdspb.com), but does not have the assembly for the reg.

OLD_B4LL3R · 11-15-2010, 08:25 AM

Quote:

Originally Posted by FallNAngel

Added a link into the sticky. Ydna already has a diagram for the firing assembly on his website (www.zdspb.com), but does not have the assembly for the reg.

Yep - Got the firing Assy. YDNA's Great! - I just want the rest!

Need the Reg, Manifold, ASA, body, etc. Anywhere there's an oring.
As I come across them, I will add with call outs. When I service my reg(no time soon) I will take some more detailed photos and label accordingly.

Thanks very much FallNAngel!

.

ZerOxShadows · 11-15-2010, 09:14 AM

Looks great! Keep it up, Rob.

OLD_B4LL3R · 11-15-2010, 09:24 AM

Thanks Zero - will do man!

.

Allstar_77 · 11-15-2010, 11:22 AM

Where can I purchase some of the 17/70 HBNR orings?

OLD_B4LL3R · 11-15-2010, 11:48 AM

Mcmaster Carr - or from the Official DLX Oring kit.

.

uranjack · 11-15-2010, 03:30 PM

Quote:

Originally Posted by OLD_B4LL3R

Mcmaster Carr - or from the Official DLX Oring kit.

.

Contact oring monkey, if its not on their website, the will most likely be able to get it.

gruesomekyle · 11-15-2010, 06:51 PM

Oringmonkey has a luxe total rebuild oring kit for pretty cheap.

**FallNAngel** · 11-15-2010, 08:16 PM

Quote:

Originally Posted by OLD_B4LL3R

Mcmaster Carr - or from the Official DLX Oring kit.

.

Mcmaster has the correct size and duro, not material.

Ragin Cajun · 11-15-2010, 08:26 PM

Quote:

Originally Posted by Allstar_77

Where can I purchase some of the 17/70 HBNR orings?

Quote:

Originally Posted by FallNAngel

Mcmaster has the correct size and duro, not material.

True. You dont need the HBNR material though. Buna will work fine. McMaster sells those.

doodlebugsportz · 11-15-2010, 08:56 PM

We will have all the correct orings back in stock in about a week as well as the mini player kits.
The biggest difference in materials is how long the orings actually last... and how much of the wear material ends up thruout the gun, ever notice that the grease turns black with Buna orings? It all boils down to how much you want to spend & how many times you want to spend it.
The HN orings also tend to have better tolerances. We use to use HN thruout the gun in our team guns, but found over time that in some places they just don't hold up well like in the reg, and they tend to be a bit better when the lube gets thin..

Pooty51 · 11-15-2010, 09:34 PM

Nice rob!

Now we just need to do a full luxe diagram with all it's o-ring sizes.

OLD_B4LL3R · 11-16-2010, 04:21 AM

Quote:

Originally Posted by doodlebugsportz

We will have all the correct orings back in stock in about a week as well as the mini player kits.
The biggest difference in materials is how long the orings actually last... and how much of the wear material ends up thruout the gun, ever notice that the grease turns black with Buna orings? It all boils down to how much you want to spend & how many times you want to spend it.
The HN orings also tend to have better tolerances. We use to use HN thruout the gun in our team guns, but found over time that in some places they just don't hold up well like in the reg, and they tend to be a bit better when the lube gets thin..

Yep - and thanks again for the list. And I will be in touch for a Full Parts Kit - and Spare Board! It was great talking to you (if this is Don). Please keep looking for that CAD Diagram...... I can't put a face on some of the oring locations. O_o

Quote:

Originally Posted by Pooty51

Nice rob!

Now we just need to do a full luxe diagram with all it's o-ring sizes.

Thanks and DoodleBugSportz is trying to get me one. Don said they have a CAD drawing somewhere, and one machine (PC) went belly up. But Don seems to be a great Guy and if he says, "He'll find it." He'll find it!

I will diagram it up to show all the O-ring locations.

.

Allstar_77 · 12-17-2010, 01:55 PM

Can anyone tell me where I could pick up a 08/90 UR oring (body/frame)? Help is appreciated!

OLD_B4LL3R · 12-17-2010, 06:37 PM

McmasterCarr :
Part Number: 9558K631

airforcewes · 12-31-2010, 11:56 AM

donding6 · 09-05-2011, 05:14 PM

006/ 70 UR? Is that the size of the o-ring needed for the asa?

OLD_B4LL3R · 09-06-2011, 05:51 AM

Size is 006
Hardness is 70 Durometer
Material Type is Urethane

traven · 11-24-2012, 02:34 AM

I'm pretty sure the Luxe has the same HPR as the ion. Here's the diagram please remove if I'm wrong but it looks the same.

OLD_B4LL3R · 05-06-2013, 01:54 PM

I've been made aware of the Oring List Pic - Disappeared / Deleted

I will get it back up tonight.

****** Edit - guys I'm having a real hard time finding my Excel Spreadsheet that I created this on.... still looking.

.