[Nexxux]

I updated the list a little. And also, made the images easier to read.

The only oring I am missing is the sealing gasket oring inside the solenoid cap. If anyone knows the size of it, I would greatly appreciate it. That way I can have a complete list here. Looks like a 1mm x 8mm or maybe 1mm x 7.5mm, just dont have a chart to size that particular one to be sure.

[nhoj_yelbom]

i have used your info and added the exact names, part numbers, reference numbers that correspond directly to the diagram and parts list in the axe manual. feel free to modify and use. btw, thanks for the info!
https://docs.google.com/file/d/0B6Ss...it?usp=sharing

[Pson]

You are the man

[blueshifty]

I just have a few corrections after coming back to this list:

Poppet Oring is 013 urethane 90.


Lurker:
Lurker Bolt Spacer Outer optional is a tank oring which is 015 urethane 90.

Lurker Bolt Spacer Inner is easiest with an 015 urethane 90.

Boss:
Team Series Front Bolt Oring - Custom Dyed 017 urethane 70

Team Series Rear Bolt Oring - Custom Dyed 015 urethane 70



Another couple things to add is that the ideal material for any bumper is VITON. It has the best rating in compression set tests. I'd recommend them in the following applications:

Bolt Guide Bumper - 012 Viton 75
Boss Bolt Bumper - 015 Viton 75

Oddly enough, boss uses urethane bumpers ~90duro which are rated towards the bottom in testing.

Another couple options is that 1.5 x 11mm Urethane Bolt Guide orings can be sourced here: http://www.allsealsinc.com/ The price seems to roll-off in orders of 100+.

[Nexxux]

still need to know the size of the thin oring on the solenoid.

[going_home]

Thanks for the list sir.

Why isnt this stickied ??????

Keep having an issue with the Upper transfer tube bottom o ring.

Did a search and found Orings-Online.net was about half the price for 25 of the size I needed than o ring monkey.

$4.75 shipped versus $9.00 shipped.

[ironyusa]

Correction to my post with blueshifty account above:
Poppet oring is a 2mm x 10mm 90 duro urethane.

http://inceptionforums.com/showthrea...e-O-ring-sizes

[Nexxux]

Originally Posted by going_home

Thanks for the list sir.

Why isnt this stickied ??????

Keep having an issue with the Upper transfer tube bottom o ring.

Did a search and found Orings-Online.net was about half the price for 25 of the size I needed than o ring monkey.

$4.75 shipped versus $9.00 shipped.

Glad I could help.

And blueshifty and ironyusa.....I did these a long time ago, so not sure if the inception forum had their list up yet. I just went through myself and sized them up. And I wasn't too concerned with material type, I usually stick to Buna orings myself. Much cheaper, and get the job done.

And thanks for adding to the thread. I might try and post your updates on page one here soon.