ok, so i bought this shocker from a dude here on pbn, from this heffe guy. he tells me that it had an he bolt in it but i dont think so, it looks like the stock sleeve and bolt, but he tells me its the smartparts old he and the evolve sleeve and the evolve big black thing. the bolt doesnt have slots instead of holes and there isnt that oring up close to the front so it cant be the sp he. ill post pics so somebody can tell me what it is.
other than that i think i have an upper board problem. the eyes dont work, and the on/off button doesnt work everynow and then, where can i get just the upper board?
Post pics of the bolt and I or someone else can tell you. Also check your upper board for screw damage. Zdspb.com has all of your shocker needs, and its a great site. Id check that site out and pretty much all of your shocker questions will be answered. If you need any further help you can get me on aim kunzy420
the upper board doesnt show signs of damage, but sometimes the button wont do anything, i can feel it click and i have to hold it down, and it changes from vision to non really fast, one time it didnt even power up for a whole day, and the vision is acting like its not registering paint. i get that stupid noise. he said he replaced the wiring harness and eye, and i cleaned it just to be sure, but everything stayed the same. this is all with a new battery of course.
Pics wont work even with that link. Check the connectors on the board..Where the wiring harness plugs in. I think its like the ninth pin thats for vision. If thats bent then you will have vision problems. All of this is on zdspb.com so check that out.
Usually the power button working intermittantly is resultant of it being damaged or worn out. The microswitches can exhibit the same "bouncing" problem as trigger switches, I've seen it a few times before.
As told by Stobaeus ...someone who had begun to learn geometry with Euclid, when he had learnt the first theorem, asked Euclid "What shall I get by learning these things?" Euclid called his slave and said "Give him threepence since he must make gain out of what he learns".
To test the power switch take the grip frame off the body then while the two are apart plug the harness back in. Then use your thumb to gently push the on off switch in. If it still works intermittantly then its what YDNA said. If it works fine using your thumb then it is miss aligned or too far from the button in the frame. You can try placing white out on the face of the on/off switch to bridge the gap.
__________________
Assumption is the mother of all **** ups.
"Thats a lot of Romans over there." "Yes but not one of them is Gisgo." Hannibal Barca and general Gisgo before the battle of Cannae in 216 BC.
Your Privacy Choices