[anson14]

Ok so whn i air up my tank and twist it in my ion the pressure gauge on my ion is exactly at 200 i dot think thats good and some times my gun wont shoot i have to unscrew my tank and then my gauge is at 150 then i have to unscrew my regulator, when i unscrew the regulator it pushes the rest of the air out and my gauge goes down to 0 my gun isn't supposed to do that if anyone could help me figure this out id greatly appreciate it

[stealthninja]

lower your reg setting, it should be at 180 give or take a few psi. if your pressure is too high, it will prevent you from firing.

[anson14]

How do i lower m reg settings?

[JRuss7]

The same way you increase and decrease your velocity. With the stock reg on your ion there should be a nut or bolt right about your macroine and elbow fitting. Adjust it accordingly.

I suggest you read your manual. If you don't have one then I would just type in into a search engine and download it.

Btw, if you've never cleaned your reg, I recommand cleaning it it as well

[anson14]

Ok thanks guys i was waiting on some lube soi could clean the reg