[Automatic Thrill]

My Vapors:

[cozmo5050]

Originally Posted by Cthulhu24

ProMod I really sorry to hear that. I'm sorry ive been bugging you so much about these markers I just know nothing about the Vapor and im really strongly considering picking one up. Ive never seen one in person so i have to ask what is better looking the Dust colors or the regular colors Im looking for something Red/Grey or Orange/Black.

mike from the other paintball website just released a youtube video on the vapor... I'll watch it when i get home

vapor colors, dust looks better to me, especially black

[Cthulhu24]

Originally Posted by ProMod

up your dwell by 1ms, set your ABS dwell to 2 and the ABS timer to 2....also, try using a thinner lube



No worries dude, I'm here to help. Personally, I love gloss finishes, but dust tends to hide small scratches better. Machine should be able to get you any color-scheme you want, but splash annos need to be done through shootnpoo.

Promod if i buy a used vapor is there anyway i could transfer the gun into my name because I would like to get the hopper with the used gun if possible.

[C-LO21]

[quote=ProMod;77012524]up your dwell by 1ms, set your ABS dwell to 2 and the ABS timer to 2....also, try using a thinner lube


THANK YOU!

[ProMod]

Originally Posted by Cthulhu24

Promod if i buy a used vapor is there anyway i could transfer the gun into my name because I would like to get the hopper with the used gun if possible.

Yep! Just go onto Machine's website under the Tech Support section and re-register the marker under your name and you'll get the hopper. The warranty and hopper follow the marker, not the person.

Originally Posted by C-LO21

THANK YOU!

Anytime dude.

[godraep]

Im going to have Southcarcocks om you if the tuning guide doesn't get his up and running. Its not running so hot from the factory

[ProMod]

Originally Posted by godraep

Im going to have Southcarcocks om you if the tuning guide doesn't get his up and running. Its not running so hot from the factory

Yep, have him PM me and we'll get it up and running in no time!

[ninjagummibear69]

Does upping the dwell to 15 actually make this marker smoother? I went from 9-15 and thought it might have. Just wanted to know your thoughts. Thanks

[ProMod]

Originally Posted by ninjagummibear69

Does upping the dwell to 15 actually make this marker smoother? I went from 9-15 and thought it might have. Just wanted to know your thoughts. Thanks

I tell people to up the dwell to 15 as an arbitrary setpoint; meaning it's a dwell that every marker should be able to use before tuning. It probably won't be any smoother, but I won't get people saying "I used your tuning guide and now my marker isn't firing... -derp"

[ProMod]

Hey All!

I know that a lot of you have used my Vapor Repair service and I've finally made an 'official' thread. If any of you would like to leave me feedback, the thread can be found here: tinyurl.com/93jrk34

[Fiskett]

I have a question.

The winter is around the corner here in Sweden. Witch means there will be no more paint practices.

Can I do this tuning guide with reballs?

Dwell 15 -> the right velocity (230ish) -> tune assist and the regular stuff?

[ProMod]

Originally Posted by Fiskett

I have a question.

The winter is around the corner here in Sweden. Witch means there will be no more paint practices.

Can I do this tuning guide with reballs?

Dwell 15 -> the right velocity (230ish) -> tune assist and the regular stuff?

Yessir, the same rules should apply, just use your new chrono velocity (230-240).

Old tech trick: If your marker is firing inconsistently with the lower velocities, you can throw a few loose orings into the shot volume chamber (decreasing the shot-volume) which will allow you to turn up the pressure a little bit. Just remember to remove them when you switch back to paint

[Hectix]

will the vapor run ok on 600 psi?

[The Mince]

600 is pushing it i think. It needs to be below 600. Wait for the experts though. I run mine at 450 with no problems.

[Hectix]

i bought a low pressure kit for my myth g2, but you have to take off the reg to change the seat retainer. I dont have time to go to the pro shop and have it taken off then put back on and the stock output is 600. the lp kit brings it down to 400. could i run it for a day at 600? or possibly leave the seat retainer in and use the rest of the kit?

[The Mince]

I think machine say 450-600. So you might be alright i honestly wouldn't like to say. But i think 400 might be a bit low. I'm sure pro mod will be along soon to clear it up.

Can you not get a strap wrench to take the reg off yourself?

[Hectix]

yeah i guess i could try and take it off, but don't you also have to locktite it on? or can you get away without doing that

[Razgriz183]

Originally Posted by Hectix

yeah i guess i could try and take it off, but don't you also have to locktite it on? or can you get away without doing that

you can just hand screw it back in, 2 of my tanks are like that

[ProMod]

600 is REALLY borderline, and the G2s are known for having the occasional pressure spike. Do yourself a favor and have the LP kit installed beforehand.

[Hectix]

ok i will do that. any news on the hopper? I thought it was supposed to be unveiled at world cup?

[Hectix]

and when i registered the marker was i supposed to receive any sort of notification? I registered it and didn't get an email or anything. and that was at the end of september