[Sunburnt-redneck_jon]

Can anyone out there give me an idiot proof guide to shorten up the trigger pull on my stock dm4

[Koruption74]

turn the top screw in all the way. then turn out until u like it. then mess with the 2nd screw hole until u find a good activation point

not hard

[Sunburnt-redneck_jon]

does srewing the second screw in make the activation point sooner or later

[brian_744]

BOTH

[DefianceTimmy]

how about u mess with it and then tell us.....

[Scootscr15]

lol... sorry bro, but you do not deserve the marker if you are uncapable of such a mundane task as trigger adjustment..

[Sunburnt-redneck_jon]

lets b an *****le scootscr15
i wanted a basic knowledge of wat i was doing before i got into
thanx brian_744 and Koruption74 i got it figured out

[JNikL_04]

scoot is right though dude... all guns have pretty much the same trigger adjustment...

[DM4paul]

1) take off the frame
2)get the coreect allen wrench, and adjust the first screw (the one closer to the front of the gun), that is pre-activation pull, the back screw is post-activation screw

FYI you can make the trigger pull so light that touching it on the side makes it fire 3 times with no bounce

[JNikL_04]

Originally posted by DM4paul
1) take off the frame
2)get the coreect allen wrench, and adjust the first screw (the one closer to the front of the gun), that is pre-activation pull, the back screw is post-activation screw

FYI you can make the trigger pull so light that touching it on the side makes it fire 3 times with no bounce

someone already said that, minus the stupid FYI comment that makes no sense at all... 1 pull = 3 shots... that is bounce idiot.