[custar]

Serial Number: VK#B 02128
Board Type: Tadao
Milling Style: Bonebrake
Date Received: Sept 08
Approx Number of Shots: ?
ROF:
LPR: 70
Feed Tube: twist lock
Trigger: JmJ blade
LPR: SCM
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Apache.
Air System: Whatever is handy
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: matching anno'd .689 Javelin
Any Problems: Nope
Comments: Hatori Hanzo

[paintballking621]

Serial Number: VK#B01922
Board Type: WAS 1.6
Milling Style: JMJ Featherlite Swirl
Anno: Dust black Gloss Black parts
Date Received: Feb 19,2009
Approx Number of Shots: ?
ROF:semi uncapped
Feed Tube:CCM Clamping No-rise
Trigger: JMJ Blade
LPR: SCM 3
Pinches Per Hopper: None Yet
Chops: None Yet
Breaks: None Yet
Loader: Halo
Air System: 68/45 dxs
Consistency: +/- 4
Efficiency: Not Sure Yet
Preferred Barrel: Matching Annoed Javelin Barrel
Any Problems: None Yet
Comments: Awesome so far.

[jtez33]

Serial Number: VK#A00234
Board Type: WAS 1.6
Milling Style: unmilled
Anno: Dust black
Date Received: Feb 22,2009
Approx Number of Shots: ?
ROF:semi uncapped
Feed Tube:stock
Trigger: Dans razorblade
LPR: stock
Pinches Per Hopper: havent even shot it
Chops: None Yet
Breaks: None Yet
Loader: VL Jr.
Air System: 68/45 dxs
Consistency: +/- 4
Efficiency: Not Sure Yet
Preferred Barrel: Ultralite
Any Problems: None Yet
Comments: Just picked up this Jewel, now its time to have some fun with it.

[heisman01]

Serial Number: VK#A1023
Board Type: WAS 2.0
Milling Style: JMJ crusander
Anno: salmon pink 1 of 1
Date Received: march 2009
Approx Number of Shots: ?
ROF:semi uncapped
Feed Tube: No-rise
Trigger: JMJ nurvus
LPR: internal
Pinches Per Hopper: None Yet
Chops: None Yet
Breaks: None Yet
Loader: rotor
Air System: 68/45 GA
Consistency: +2
Efficiency: about 1800
Preferred Barrel: Matching Annoed Javelin Barrel
Any Problems: None
Comments: going to mill and mod and just make a big ole mess of things

[GMarv]

Serial Number: VK#A1055
Board Type: Tadao
Milling Style: DCOG
Anno: Italian fade + engraving
Date Received: Summer 2007
Approx Number of Shots: ?
ROF: Semi uncapped
Feed Tube: BP No-rise
Trigger: JMJ nurvus ( Italian horn )
LPR: SCMIII
Pinches Per Hopper: None
Chops: None Yet
Breaks: None Yet
Loader: VLocity
Air System: 45/45
Consistency: +-5
Efficiency: about 900
Preferred Barrel: Matching Annoed Javelin Barrel
Any Problems: None
Comments: Prettiest thing I've ever laid eyes on

[jonny72888]

Serial Number: VK#A00781
Board Type: WAS 1.6
Milling Style: JMJ Feather Lite Swirl
Anno: Dust Black
Date Received: April 2009
Approx Number of Shots: 8k
ROF:Semi uncapped
Feed Tube: No-rise
Trigger: JMJ Nurvus
LPR: Internal stock
Pinches Per Hopper: None
Chops: None
Breaks: 1
Loader: Halo and ReloaderB
Air System: 45/45
Consistency: Not Broken in yet +/- 10
Efficiency: ~600 off of 3k
Preferred Barrel: Deadlywind
Any Problems: I can not carry enough paint

[onionheadfriend]

since ive yet to do this for any of my vikings....

Serial number : A00830
Board Type: was 2.0
anno: "viagra" dust blue
Milling Style: stock
Date recieved : 6/13/08
Approx num of shots: n/a
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
trigger: stock stick
Loader: rotor/v35 halo
Air system: PE 70/45 stubby
Consistency: +/-3
Efficiency: case 1/4 - case 1/2 per fill.
Prefered barrel: stock
Any problems: none
Comments: my first viking

Serial number : A00694
Board Type: tadao
anno: dust red with black parts
Milling Style: Dc'd FSP'd half mill
Date recieved : 1/20/09
Approx num of shots: 2k
Rof: Unlimited
Lpr: SCMIII
Feed tube : Low rise
trigger: froth gatorlite
Breaks:none
Loader: rotor
Air system: 70/45 subby
Consistency: usually about 2 in each directoin
Efficiency: around a case a fill
Prefered barrel: matching anno CP kit
Any problems: none

Serial number : b2113
Board Type: ego Yakuza OLED board
anno: gloss black
Milling Style: Featherlight
Date recieved : 5/20/09
Approx num of shots: ?
Rof: Unlimited
Lpr: SCMII
Feed tube : Low rise
TRigger: reverse wave
Chops: please
Breaks:none
Loader: rotor
Air system: 70/45
Consistency: dunno
Efficiency: around a case a fill
Prefered barrel: DW barrel kit
Any problems: none
Comments: easily the best looking gun i own

Serial number : B01992
Board Type: WAS 2.0
anno: 1 of 5 from factory dust grey
Milling Style: immortal
Date recieved : 4/13/09
Approx num of shots: unknown
Rof: Unlimited
Lpr: SCMIII
Feed tube : Low rise
trigger: JMJ Nervous (or as marv calls it the italian horn)
Breaks:none
Loader: halo v35
Air system: 70/45
Prefered barrel: stock
Any problems: none

[foughtwolf]

Serial Number: VK#A00484
Board Type: Pandora
Milling Style: Halfmill
Date Received: Sept 20
Approx Number of Shots: ?
ROF:20 MROF
LPR: 70
Feed Tube: Locking
Trigger: JmJ blade
LPR: SCM
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Halo A.
Air System: 68/3000
Consistency: +/-3
Efficiency: 2000+
Preferred Barrel: Javelin
Any Problems: Board wont run on any mode aside from Conservative.
Comments:Great Halfmill blind Viking, Glad to be a member of the family

[bigalila]

Serial number : VK# A00212 (previously timmah333's but Mine now)
Board Type: PM5 UL in the works
Milling Style: Factory Half Mill
Date recieved : 2/24/09
Approx num of shots: About 6 cases since I own it
Rof: Mille 10BPS
Lpr pressure: 65 psi
Feed tube : Low rise
Pinches per hopper: none
Chops: none
Breaks: none
Loader: Rotor
Air system: Seventh Element 68/45
Consistency: +/- 3
Efficiency: about 2000 even
Prefered barrel: Freak with Stiffi tip or Macdev Shift
Any problems: none
Comments: Getting the UL frame sorted out, Seventh Element Pathfinder board to come onboard later ;-)

[Stevematusick (Banned)]

Serial Number: VK#A 00785
Board Type: WAS
Milling Style: Half Mill
Date Received: Oct 09
Approx Number of Shots: ?
ROF:
LPR: ?
Feed Tube: Low Pro
Trigger: JmJ blade
LPR: SCM
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Magna
Air System: Conquest
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: Freak
Any Problems: Nope
Comments: Just got this, awesome marker[/quote]

[Chopper Duke]

Serial Number: VK#A 00689
Board Type: WAS
Milling Style: Unmilled
Date Received: Dec 09
Approx Number of Shots: U/K
HPR Sidewinder
ROF: U/K
LPR: Stock internal
Volumizer Stock internal
Feed Tube: CCM
Trigger: JMJ blade
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Halo
Air System: PMI 68/45
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: Stock Javeline
Any Problems: Nope
Comments: Really Dig the Red Anno


Serial Number: VK#B 01949
Board Type: WAS
Milling Style: Unmilled
Date Received: Dec '10
Approx Number of Shots: U/K
HPR Sidewinder
ROF: U/K
LPR: SCM
Volumizer Mightey Max
Feed Tube: Low Pro
Trigger: Stock
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Halo
Air System: PMI 68/45
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: Freak System
Any Problems: Nope
Comments: Picked this up recently with another Viking.


Serial Number: VK#B 02026
Board Type: Tadao
Milling Style: Tarantula
Date Received: Dec '10
Approx Number of Shots: U/K
ROF: U/K
HPR: SST
Feed Tube: Low Pro
Trigger: Custom Tarantula Frame with custom trigger. Marq-esq frame.
LPR: SCM
Volumizer Mightey Max
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Halo
Air System: 88/45 Carlton with Ninja Reg
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: Dye UL bored for freak inserts
Any Problems: Nope. Just need to finish it.
Comments: Picked this up with another '04 Viking. It's raw right now but I plan on annoing it.

Serial Number: VK#B 02275
Board Type: Pandora
Milling Style: Unmilled
Date Received: March '10
Approx Number of Shots: U/K
ROF: U/K
HPR: Sidewinder
Feed Tube: Low Pro and stock
Trigger: Stock
LPR: SCM
Volumizer Mightey Max
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Halo
Air System: 68/45 PMI
Consistency: Excellent
Efficiency: Awesome
Preferred Barrel: Unknown big bore and a freak system
Any Problems: When I received it, the eyes were plugged into the board incorrectly and the Ram was leaking. I fixed both issues and now she's shooting as good as new!
Comments: Picked this up knowing it had some issues, but I was able to fix them all and she's running great!

[southerndandy]

Serial number : 2233
Board Type: WAS
Milling Style: Featherlight swirl
Date recieved : jan 2010
Approx num of shots: ~200
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
Pinches per hopper:
Chops: none yet, havent used much yet
Breaks:none yet, havent used much yet
Loader: halo b
Air system: myth 68/3000 pre-set
Consistency: dunno yet
Efficiency: guessing 1500-a case per fill
Prefered barrel: freak/cp/ultralite depending on paint
Any problems: had a lot of bounce in the trigger, just upped debounce, all set
Comments: so far i love this thing. i have had dreams about it, no lie.

[heisman01]

Originally Posted by ExileFNTMan

Serial number : 1751
Board Type: WASebisu
Milling Style: Unmilled
Date recieved : 07/28/0503/25/10
Approx num of shots: N/A
Rof: Unlimited
Lpr pressure: 60 psi
Feed tube : BP No-Rider
Pinches per hopper: 0
Chops: 0
Breaks:0
Loader: Reloader Brotor
Air system: '04 Max-Flo 68/4500 xfire 68/45
Consistency: Amazing
Efficiency: a full case
Prefered barrel: Freak kitlucky 15
Any problems: No
Comments: I love it

mine now updates in red

[balla24]

Serial number : VK#B01672
Board Type: Virtue/UL board
Milling Style: Standard
Date recieved : 2 1/2 years ago I think
Approx num of shots: No idea. Not very heavily used from the person I recieved it from
Rof: capped at 12.5
Lpr pressure: 65
Feed tube : Low rise
Pinches per hopper: none
Chops: none
Breaks:none
Loader: prophecy
Air system: Ram Air 68/4500 w/ Draxxus reg( HP Output)
Consistency: Not sure, haven't shot it in a while. Going to play with it soon.
Efficiency: Not sure
Prefered barrel: Deadlywind
Any problems: N/A
Comments: UL frame installed. Need battery harness for original WAS board or Tadao to put stock frame back.

[Someonelse2]

Serial number : VK#B01813
Board Type: UL board
Milling Style: DC milled blue to black fade
Date recieved : 1 year ago
Approx num of shots: Not sure. Above 25 cases myself, previous owner even more? It is well used.
Rof: 14.5 bps, or fast as my fingers
Lpr pressure: 72
Feed tube : Low rise
Pinches per hopper: none
Chops: 1
Breaks:3 (barrel breaks)
Loader: Halo B
Air system: Pure Energy 68/4500
Consistency: +- 5, better with good paint.
Efficiency: approx 1500+ on 68/45 filled to 4000psi
Prefered barrel: Evil Pipe kit
Any problems: Leaked down barrel once. Added oil, it fixed itself.
Comments: I believe i have found 'The One'

[1st ancient warrior]

Serial number : VK #A00223
Board Type: WAS
Milling Style: none
Date recieved : 11/01/10
Approx num of shots: unknown
Rof: Unlimited
Lpr pressure: Stock
Feed tube : Low rise
Pinches per hopper: none
Chops: None
Breaks: None
Loader: V35 Halo
Air system: 114/45 tank, Ninja HP Reg
Consistency: dunno yet
Efficiency: around a case and a half per fill
Prefered barrel: Stock small bore
Any problems: none
Comments: O-M-G

[Twizted Brain Wave]

Serial Number: ....gotta check later
Board Type: M5 Tadao
Milling Style: Half Mill
Date Received: September(ish) of 09
Approx Number of Shots: 8,000+
ROF: 12.5 BPS
HPR: Sidewinder
Feed Tube: FBM No-Pro
Trigger: DM5 frame w/stock trigger
LPR: Stock
Pinches Per Hopper: None
Chops: None
Breaks: None
Loader: Rotor
Air System: 50/45 Ninja
Consistency: Great
Efficiency: Pretty good...needs better tuning
Preferred Barrel: Javelin .685
Any Problems: When I recieved it, the LPR was cranked WAY high, it kicked like a mule, and I could only get 2 pods and a hopper off my 50/45. Plus, it came with a CP... Tuning the LPR gave me another pod and a half, if not a little more with a good fill. I bought a Sidewinder for it, and it's been great ever since!
Comments: This is the third Viking I've owned, both before this were unmilled with the Pandora board. They worked fine...but I like this one the best. A little milling adds a touch of cool...but no big problems with it. I put some oil and air through it today for the first time in 7 months, and I remember why I love this marker so much.

[711clerk]

Serial number :B 2026
Board Type: tadao marq 7 board
Milling Style: Tarantula Fsp 04
Date recieved : 11/13/2010
Approx num of shots: Unknown
Rof: Unlimited
Lpr pressure: 72psi
Hpr: sidewinder
Feed tube : low rise
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: Rotor
Air system: ninja air 68/4500
Consistency: +/-3
Efficiency: +/-1600 on a 4200 hot fill shooting all star
Prefered barrel: ultralite
Any problems: none
Comments: The Swimming Pool Viking

Serial number :B 1561
Board Type: tadao oled
Milling Style: Tarantula Fsp 04
Date recieved : 11/22/2010
Approx num of shots: unknown
Rof: Unlimited
Lpr pressure: 65 psi
Hpr: 2 liter
Feed tube : low rise
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: rotor
Air system: Ninja Air 68/4500
Consistency: +/-3
Efficiency: +/-1700 on a 4200 hot fill shooting all star
Prefered barrel: macdev shift
Any problems: none
Comments: Agent 47 Viking

[Ideal Paradigm]

Serial number : VK#B02528
Board Type: Tadao
Milling Style: Un-milled
Date received : August 2010
Approx num of shots: Unknown
ROF: Unlimited
LPR Pressure: 72 PSI
Feed tube : CCM Low Rise
Pinches per hopper: None.
Chops: None.
Breaks: Only barrel breaks.
Loader: Empire Prophecy.
Air system: Pure Energy 68/4500
Consistency: +/- 2 with a good paint bore match.
Efficiency: Approximately 2000 shots per 68/4500 cool fill.
Preferred barrel: Titanium Longbow (Titanium backs, not aluminum)
Any problems: None.
Comments: Recently sent the Viking off to Destructive Customs in order to have the Viking milled and anodized. Many things will be replaced. I will also edit this post to show before and after.

Currently what it looks like:











Update: I received my Viking back from Destructive Customs and here are the pictures. It's an FSP mill plus a little more milling along the bottom and top tubes. I also got a Frenzy Frame as well.

[Tek2974]

Serial number : VK#B02576
Board Type: Musashi
Milling Style: Destructive Customs 04 w/ FSP Milling, Hidden noid milling, all diet milling
Date recieved : 1/18/11
Approx num of shots: Unknown
Rof: I wish my fingers were fast enough to keep up
Lpr pressure: 72psi
Feed tube : Low rise
Pinches per hopper: none
Chops: surely you jest.
Breaks: lol
Loader: Dye Rotor
Air system: Crossfire 68/4500
Consistency: +/- 3
Efficiency: OVER 9000!!!!!!!!!!!
Prefered barrel: Javelin
Any problems: None
Comments: Its beautiful.

[Enfamous13]

Viking serial num : VK#A00264
Style: Black 03 Half Mill Brick, Taddao EBIUS
Date recieved : 12/08/2010
Approx num of shots: A whole heap
Rof: Semi
Settings: Dwell 6
Lpr pressure: 72
HPR pressure: ??
Feed tube : A+ No rise
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: Rotor
Air system: Ninja 45/4500
Consistency: ??
Efficiency: Was a hopper and 4 pods now a hopper and 7+ pods
Prefered barrel: Smart Parts Freak
Any problems: Poor efficiency, until I fixed the leak coming from my hammer.
Comments:JMJ Snatch grip, uv eyes, jmj razor trigger, sm3, mighty max, hump solenoid. First AKA marker, didn't make me feel warm and fuzzy like my eblade and mag until I fixed the leak.