AKA OT v4

DozerLVL · 01-12-2012, 10:01 PM

Cock-er punk just put up a viking video. . . just saying.

TheePsycho · 01-12-2012, 10:06 PM

Quote:

Originally Posted by DozerLVL

Cock-er punk just put up a viking video. . . just saying.

Doesn't he only post on the site that shall not be named now?

gunhero5 · 01-12-2012, 10:38 PM

Quote:

Originally Posted by TheePsycho

Doesn't he only post on the site that shall not be named now?

Yeah, which is ironic because 'old school' guns hardly ever show up there.

Just watched the video. It's too bad his mundane example of a viking was so old and beat up that it made it hard to see how it could compare to current markers.
One of you need to lend him a proper Viking, and recommend that he reassess.

Fallinher0 · 01-12-2012, 11:01 PM

Its really hard to listen to that guy talk with all his pauses and "uuuuuuuhhhhhhhhhhhhhh" lol

TheePsycho · 01-12-2012, 11:39 PM

I can't stand people that stammer when they speak unless they have an underlying condition.

I guess he has a problem with tolerances.

He is correct that tight tolerance parts usually are more expensive parts. Where I work all of our equipment needs to be spot on since it is medical equipment. Now I know of one CNC shop that has a machinist on 1st shift to for retooling and reprogramming/calibrating the machines. They do not have any on the other shifts because it is cheaper for them to recycle any parts that are not created to spec because of worn tooling or any other errors. That does look like a very abused JMJ Swirl.

Tracker · 01-13-2012, 03:14 AM

Quote:

Originally Posted by TheePsycho

Doesn't he only post on the site that shall not be named now?

that, and he is banned from this one..

as far as my critique of his video (which i really cant believe im watching. as i ****ing hate the guy)

hes right about the design, but i wouldnt dare use intimidator when comparing it. but it wasnt intended to be a mid level gun, cause they were only about 200 dollars cheaper than an excal, since when has 1000 been mid level?

he doesnt know what he is talking about with javelins

ive opened enough rams to know first hand that grease isnt used in the original assembly, now if HIS needs grease, well thats cause his o-rings are worn. comparing one gun to all of them is stupid.. but thats what he does.. which furthers why i think hes an *******

the comment about tolerances.. oh where to begin..
#1 tighter tolerances make thing more expensive to produce. yup, why do you think they were selling vikings and excals for 1000-1200 dollars?
#2 why would you need tight tolerances if there's an o-ring? he as an engineer should know this one, because nothing on the gun is pipe threaded, therefore its not gonna seal itself naturally
#3 tolerances don't mean what you they do, to you, the consumer. i hate being talked down to, which is the primary reason why i hate Gordon, because from his original days on this site he has acted like he has known everything,
he must be lightheaded most of the time from his ego displacing all the oxygen in whatever room he happens to be in

people do get a case off a 68, ive seen it, ive done it, just because you've never seen a shark doesn't mean hes not there

he really needs to do some ****ing research before he opens his mouth.. oh, wait, that would make me respect him on some level..

i truly hope no-one sends him an excal, just on the principal of the fact hes ill-informed and people seem to listen to what he says because he doesnt know any better

i have never wanted to do a reply video before until now, ill do one this weekend, and ill keep the uhhhhh's to a minimum

Tracker

TheePsycho · 01-13-2012, 08:30 AM

I hope no one ever sends him an Evil Ehm. Looks like by his comments though someone is already willing to send him an Excalibur.

brock_averill · 01-13-2012, 09:57 AM

I have to agree with Tracker after watching the video. He is making broad generalizations and trying to pass them off as facts. That particular Viking has been passed around a lot meaning it has had multiple chances at getting screwed up and probably doesnt perform as well. I have never had to use grease in any AKA gun.

Efficiency wise, Im not sure I have owned a Viking that wouldn't get a case off a 68/4500 Im certain I could take mine out of the bag and do it right now without a problem.

The Viking was never meant to be AKA's flagship marker in my understanding but that doesn't mean it was meant to be mid-end (and the price tag reflected that). That is like comparing an EGO and GEO and saying one is mid-end. AKA wasnt in the business of making anything less than high-end markers.

I could go on and on about things he said in the video but his ignorance alone in other videos should tell you he doesn't know what he is talking about. Things like the Javelin, Ebisu, efficiency, etc. prove that. He is just one of those people that needs to have his ego stroked and likes to hear himself talk.

"T-MAC" · 01-13-2012, 02:39 PM

Just watched it. Love how he always has to drop in that he's an engineer.. BFD

Trigg3r Happy · 01-13-2012, 02:46 PM

I'm willing to bet without a degree lol

self proclaimed engineer. sounds like the gardeners

TheePsycho · 01-13-2012, 04:36 PM

Someone should post a efficiency video if they have a chance.

gunhero5 · 01-13-2012, 04:48 PM

Quote:

Originally Posted by TheePsycho

Someone should post a efficiency video if they have a chance.

Someone want to give me 35$ for a case of whitebox and an air fill?

TheePsycho · 01-13-2012, 10:16 PM

Nice Ferrari, wouldn't you agree?

http://www.youtube.com/embed/oiX3jdMwV7c

Tracker · 01-13-2012, 11:22 PM

ive never cared for flat paints.. makes the car look like its made of plastic

also, have never understood the need for places to use skinny scantly clad girls to model firearms.. id rather have those separate.. not together

suppose this makes me weird

Tracker