[B BoP]

So I used my used Rotor I bought off here today for the first time. The guy I bought it from said it had a virtue board in it I believe. Anyways, it's the first time I used it on the field. Several, several times it decided to stop feeding my gun throughout the day. I changed the 3 double-A's after the first time and the problem still persisted.

When I turn it on without paint it will cycle for a full turn and stop, cycle, stop. Sounds like VROOM.....VROOM....VROOM....VROOM...and my buddy who also owns a rotor said it should be consistently spinning without any paint in it. Just wondering what this may be? I had to turn the eyes off in my dm12 quite a few times and it would still just dry fire. I never owned a rotor before so I'm really not sure how it works, also it was used without a manual. Any help will be appreciated.

[Zippin35]

could be wrong but I believe the virtue pulses to save battery life. Check virtues site for a manual or e-mail address that you can get a direct answer from.

[B BoP]

Originally Posted by Zippin35

could be wrong but I believe the virtue pulses to save battery life. Check virtues site for a manual or e-mail address that you can get a direct answer from.

I tried googling some stuff and didn't find much, also checked their site and didn't see anything. I'm gonna look more into it though I was just seeing if anybody has had this problem. It blinks green and pulses after like 2-3 seconds when I turn it on without paint, not sure if normal.

I just did a couple drop tests and it pulses the paint after the hopper drops and I use pods.

[DeViLs_SouL]

Also, are you sure you dont have the Seed Installed? .. thats how it opperates!

turn it upside down, and turn it on... see if the led lights with a different color, and start turning it back right (little by little) and see if the color of the led changes.
if it does... you got the best loader ever created!!!