Quote:
Originally Posted by cole4608
Ego 7 leaking from the forward most small hole on Side of sylanoid. Does the sylanoid Need to be replaced or is there an easy fix?
|
Leaks from the solenoid are usually...
- Swap out 2 of the rammer orings. #9 in the front, #11 in the rear (see page 54/55 of your manual).
- Swap out the (2) 14x2 Orings on the LPR body. It is the part of the LPR that sits in the body of the marker that is held in by the stainless steel shaft located in the front reg mount (see page 58, figure 14.6 of your manual).
- Inspect the LPR piston regulator seat. It is the small delrin-like piece that is pressed into the skinny end of the piston shaft (page 52/53 of the manual). If missing you need to replace the piston...
- Swap out the #10 oring that is inside of the LPR Body. The LPR body is the part of the LPR that is mounted inside of the actual gun body. Unthread the LPR cap off and you can access the oring thru the front.