 |
|
02-04-2013, 06:47 PM
|
#22
|
|
|
thats the solenoid gasket, I had the same problem with my solenoid with my creed but I was able to fix it. It was little bit dirty.
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
02-04-2013, 06:49 PM
|
#23
|
|
|
does the leak comes from this area of the solenoid?
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-04-2013, 06:50 PM
|
#24
|
|
NEW ENGLAND AVALANCHE
Join Date: Oct 2007
Location: Florida
|
Just so you guys know, these solenoids are not made to be taken apart and cleaned.
__________________
New England Avalanche 2012 Sponsors
|
|
|
|
|
02-04-2013, 06:51 PM
|
#25
|
|
|
__________________
Current Gun:
Vanguard DemOn, DangerOus pOwer G4 & thReShOld, Phantom Pump
Past Gun: Tippmann(98,Project Salvo, A5, Phenom) Dangerous Power(FX, G5, Rev-i, G3 iQ) Spyder Fenix, Smart Parts SP1 & Shocker NXT Octane, Vanguard Creed,GOG Excty
|
|
|
|
|
02-04-2013, 06:52 PM
|
#26
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
not sure. It is hard to tell since the demon is hoseless. I'm sure it is coming from the red line all the way to the left. I maybe wrong. How did you fix your problem?
|
|
|
|
|
02-04-2013, 06:55 PM
|
#27
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
I dont know. I may have to buy a new solenoid because this guy gave me a messed up gun. I'm just pissed someone that plays with avalanche D2 team would send me a broken gun.
|
|
|
|
|
02-04-2013, 08:30 PM
|
#28
|
|
|
Quote:
Originally Posted by enemy master
Found the problem. After going through the whole gun decided to take apart the solenoid. i unscrewed the 2 screw that hold the solenoid together in the back of the solenoid. After it came apart in two i found that the rubber gasket in between is missing. In another word I need a new solenoid because no place sells just a gasket and it only comes with the solenoid. I will try and get in contact with the seller and have him send me a new solenoid. If not i will contact paypal to refund my money or a good some of money.
|
there is no gasket between the black part and the aluminum piece.
This is mine and you see no gazket there
go here http://www.pbnation.com/showthread.php?t=3750804
and take a look at all the oring and gazket there. Mine leaked because the 3x1 oring near the botom gazket got sucked in the hole for unknown reason. Just replaced a new oring and leak is gone.
Pretty sure your noid is fine. Do not try to take it apart more than this. |
|
|
|
|
02-04-2013, 09:46 PM
|
#29
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
got the gun working thanks guys
|
|
|
|
|
02-05-2013, 07:24 AM
|
#30
|
|
|
What was the fix?
|
|
|
|
|
02-05-2013, 10:04 AM
|
#31
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
even that i replaced every oring in the gun, manifold, and reg it still didnt work. i noticed that the gun would sometimes shoot a couple of shots before leaking or sometimes just leak right away. The solenoid would still click and cycle which it still worked. There is that little tube that connects the frame to the gun to run the air through the gun. I already replaced the orings there but i guess you need like a HUGE amount of lube on them to seal the air. The gun is shooting fine now, but in the future if someone is selling a gun i will always ask if it is working order out of the box. I guess some people are not like me selling working guns or state that your gun is not working, but is for sale. Thanks for the help guys
|
|
|
|
|
02-05-2013, 11:07 AM
|
#32
|
|
Mowing Fools Since 1987
Join Date: Nov 2004
Location: On a cozy street corner
|
Quote:
Originally Posted by juggernaught_lives
You sure it is not one of the orings from the transfer tube
|
Quote:
Originally Posted by enemy master
even that i replaced every oring in the gun, manifold, and reg it still didnt work. i noticed that the gun would sometimes shoot a couple of shots before leaking or sometimes just leak right away. The solenoid would still click and cycle which it still worked. There is that little tube that connects the frame to the gun to run the air through the gun. I already replaced the orings there but i guess you need like a HUGE amount of lube on them to seal the air. The gun is shooting fine now, but in the future if someone is selling a gun i will always ask if it is working order out of the box. I guess some people are not like me selling working guns or state that your gun is not working, but is for sale. Thanks for the help guys
|
  |
|
|
|
|
02-05-2013, 11:56 AM
|
#33
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
i changed all the oring on the transfer tube and lubed it alot at first. I went back and filled both holes tons of lube and now it works. I may have to go back and put one size bigger oring to make a tighter fit if it starts to leak again.
|
|
|
|
|
02-05-2013, 03:03 PM
|
#34
|
|
We're Weird
Join Date: Apr 2008
Location: Beaverton, OR
|
Also, that SLP probably isn't doing you any favors. I'd recommend putting at least 550psi to the gun. Proper pressure helps it seal too.
__________________
VANGUARD CERTIFIED MASTER TECH
Dead Box Sports
West Coast Parts, Service, Warranty, and Distribution
www.deadboxsports.com
I have LEGO Paintballer Mini Figs
|
|
|
|
|
02-05-2013, 04:36 PM
|
#35
|
|
Join Date: Oct 2010
Location: San Jose, CA, Bay area
|
what is the proper pressure to run?
|
|
|
|
|
02-05-2013, 05:03 PM
|
#36
|
|
|
Quote:
Originally Posted by Reaper (ACI)
Also, that SLP probably isn't doing you any favors. I'd recommend putting at least 550psi to the gun. Proper pressure helps it seal too.
|
Quote:
Originally Posted by enemy master
what is the proper pressure to run?
|
550 |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
