Quote:
Originally Posted by pacasowithagun
Never had a problem with cp reg.
Usually I will puck the dwell I want to operate at then adjust the pressure until I get enough velocity. Works every time.
|
If your dwell is too low you can get it to chrono where you want by upping the pressure, but you will have terrible shoot down.
From zdspb
1. Lower the dwell to the minimum setting (or an extremely low setting, such as 12 chirps or 6 milliseconds).
2. Gradually increase dwell until the marker begins to fully cycle. You will know this time because, when the marker has trouble cycling, the sound of the bolt firing will be muffled and sound erratic, denoting inconsistencies. When you reach the point where it fully cycles, the marker will sound loud on each shot fired, with minimal sound difference between the shots (inconsistencies can be caused by other things, such as the reg, please note).
3. Once the Shocker is fully cycling, increase the dwell another 8-12 chirps (2-3 milliseconds), and that will be your dwell setting.
Also, like americanidiot said, check your oring tolerances