[DiamondxInvert]

On a invert mini would a 50ci or a 48ci be better ?

[f8al]

That is purely preference honestly. Are you comparing CF systems or a CF system against a steely? If you're looking at a steely 48 then I would say 50 simply for the fact of weight and balancing out the setup.

Either way, but Ninja and you won't be disappointed.

[DiamondxInvert]

Thanks man And I was comparing cf systems.

Is the peanut tank heavier then the 48ci ?

[Rob @ Ninja PB]

Originally Posted by DiamondxInvert

Thanks man And I was comparing cf systems.

Is the peanut tank heavier then the 48ci ?

If you are referring to a 48ci/3000psi aluminum bottle, that bottle is heavier than our peanut 50/4500. Plus, with the 50ci being rated to hold 4500psi instead of 3000psi, you are definitely going to notice more shots per fill.

If you go with Ninja, make sure you get an Adjustable regulator, meaning one that you can change the output pressure on right out of the box. The mini's and axe's love about 450-550psi.

[DiamondxInvert]

Thanks, so that would be the ninja pro ?

[Rob @ Ninja PB]

Originally Posted by DiamondxInvert

Thanks, so that would be the ninja pro ?

Here is a list of the regulators that you can adjust without having to buy any additional parts to change the output pressure:

Standard Adjustable Regulator
Ultralite Adjustable Regulator
PRO Adjustable

Heres a vid on what really sets the PRO reg apart from our other regs and everyone elses regulators.

[DiamondxInvert]

Thank you

[Rob @ Ninja PB]

Originally Posted by DiamondxInvert

Thank you

np DiamondxInvert. Let us know if you have any other questions or you can pm me direct or call me at Ninja and i'll help ya out.