[omally jones]

[YOUNGSTOWN]

It does look a little different.. but the 200 rd capacity is what is interesting...
that makes a huge difference on the field with you break out in that first 10 seconds.

[fishballer06]

I'd like to see it on a marker. It looks pretty long, but that could just be the angle of the picture.

[YOUNGSTOWN]

another thing is that from what i see there is no seam for opening on the front...so taking a direct hit would not allow a drop a paint to get into the loader....
On my rotor with multiple hits to the front...at the end of the day sometimes i notice a resedue ring on the inside where the top and bottom meet...
it is a rare thing to have happen but, i have noticed it on occasion.
So ...with a solid front.. (like a Z2... for example) you would have a less likely chance of getting that problem.

Another thing to consider is the front profile... it has some pretty steep looking angles.... might deflect paint or increase a bounce on the hopper.

Then again... it might have the same issues as the Z2 with paint getting stuck on the inside of the nose....Swelling up, then falling in the prop jamming the loader cause it is oblonged from being jammed in the nose for hours.

Hard to say, but I would like to get my hands on one to check it out.

-Chris

[fishballer06]

The entire body being one giant piece (including the feedneck) is an interesting concept. That being said, that would probably be a nice feature if you were playing in the rain and diving in the puddles. Its less likely to let water in. That being said, a larger piece of plastic leads to more stress points and more places for fail. I'm skeptical on how the back half being a "Halo" type plastic and how that will hold up. Regardless, by the looks of the disassembly, if it did crack, you could just buy a new $35 speedfeed/back-half and be good to go. Unless they are going to warranty that back half. The assembly itself seems as if it may be even simpler than the Rotor. Aligning those gears in the Rotor can be tricking if you're not paying attention.

[YOUNGSTOWN]

[fishballer06]

Anyone interested in doing a 10 man tourney?

https://www.pbnation.com/showthread.p...0#post76437060

[YOUNGSTOWN]

[Marky327]

Are we able to just come play or do we need to be trying out?

[Wastedslayer]

I asked at the SEEDS event if we could just come out and play, he said that was fine.

[fishballer06]

I can't wait for Sunday

[YOUNGSTOWN]

If are coming to the tryout tomorrow...don't forget your papers

[Wastedslayer]

Good playing with you guys today, we had fun!

[YOUNGSTOWN]

Originally Posted by Wastedslayer

Good playing with you guys today, we had fun!

Glad you had a good time.

I am trying to get a handful of teams for something on Sept 9th for a good scrimmage.

Let me know if you are interested.

[Wastedslayer]

I will talk to my guys this week, it was mentioned to us at the field as well I believe. Different layout or the same?

[YOUNGSTOWN]

Originally Posted by Wastedslayer

I will talk to my guys this week, it was mentioned to us at the field as well I believe. Different layout or the same?

Different for sure... thats been up for 3 weeks now...time for a change

[omally jones]

I like that layout

[YOUNGSTOWN]

Just a reminder for Sunday.

• Team paint

• Drills start at 8am

• Games start at 10am

[Maniac_Baller_2]

good time and definitely good work cant wait to ball with all u guys again

[YOUNGSTOWN]

Switched our registration last night.
Leaving WED afternoon from Dimension for Cup in the Van

[Sevy]

when are you paying the entry?