[jonotwist]

For as long as Ive searched PBN ive seen some pretty amazing stuff, this thread archives and links some of it. This thread is meant to give credit to those who have put the actual work into their projects, and werent Spoonfed Info. Tup. but on the other hand....

Its getting to a point where people Are too lazy to use google or wait untill the heavy traffic is down on pbn. so instead of wasting some bandwith, take a look here before you hit that "New thread" button with voided warranty and or custom guns, and asking how to UL your talon, or make (and i quote) an "egocker".

also you're in voided warranty..... where we have coffee makers able to run on low pressure using matrix and intimidator parts. (thank you doc nickel). if you have a project you want to do, dont ask if its possible, or "if I can do it". with enough work and money, anything can be done. that means if you work on it enough, (and spend enough) you can make your BE talon be electro pneumatic, UL framed, and allow it to make martinis for you.

look at these nice links Ive set up for you, and say thanks for the flaming Ive saved you.

and in no particular order....

Start Here For a General Consult on what to keep in mind before you pick up that dremmel. (riot)

Steps on how to UL a cocker.
UL negitive Ion by Nicad
UL Fs8
UL excalibur, (in progress. i think)

Ego Framed Mag,
UL Ego on PB canada
UL viking, and a how-to
A1 framed Angel g7/06 speed

Timmy, 90 frame, Bushmaster
Ego Framed Timmy
LCD framed Speed (angel)
Freestyle framed Ion
Spyder-timmy conversion

Ego7 framed cocker
ULed DP G3
Ego Ion
UL Race Karnivore
Ego frame PMR

Timmy framed Old school shocker
UL pneumag
EGO Framed Tippmann 98
EGO Angel

PMR Angel
Ego Angel
Ego cocker And a how to as well..

DM4 Tippmann 98
Ion borg
Ion Timmy,(in progress)
Eblade Tippmann

UL Remains
Etek Star framed NXT
EGO T1
just cause cockers rule... Noblocker!
Shocker Timmy
UL Quest Another project and discussion
UL shocker
UL bob long Marq

An Ego framed Fusion. something new.
Impulse Ego
NXT Shego
UL 98
General consult On Modding a UL frame for an Eblade board

UL Fusion (in progress)
UL angel
Timmy Cocker
UL ion PMR frame.

[Cpt_Carnage]

thanks for posting the threads, but as to the "holy law", i must disagree. Somethings people just genuinely (sp?) need help on. You may know the one thing thats holding them back, but the rest of the things they are doing, you* may not even fathom.

*you is not refering to anyone in particular. do not take this as an insult and start an e-fight.

[jonotwist]

but i like "e-fights"

but the golden rule only supports the idea of helping others.
such as an airsmith telling a kid how to clean and maintain his marker when its first bought. to help avoid disaster,
but I thank you for your criticism, Id like this to stay and grow to help keep down clutter.

[sdiaz]

o sweet i made it. sticky this

[Cpt_Carnage]

ok. i just hate it when i have a simple question (ie which ul frame blah blah blah) and someone just straight up is like "no, your too inept for an undertaking of this magnitude" it gets me so pissed off and they wasted a post when they could of used less effort to just give them the freaking answer.

/rant

[jonotwist]

yeah, that stuff is an actual question, that anyone with the experience can help with, Id fully try and attempt to answer those,
but questions like "how do I do this?" are right out annoying.

[S o l ^]

Good thread

[paintballer50505]

I like this thread. Will you add more links to the first post if we find threads along the way?

if this was a sticky we could generally keep all these questions just in this one thread so we dont have to see 90% of the threads on the first page just ideas or questions and not actually anything worth looking at.

[masta_blasta_21]

you should include this
https://www.pbnation.com/showthread.php?t=2431729

[PAINTBALL ZILLA]

*runs hand over thread*
**tastes fingers**

sticky, yes very sticky indees.



props man.

[xluben]

wow, very nice thread.

unfortunately the UL fusion i was doing has been canceled.

if you want to do it you will need:

to use a spacer (or tray)
use a different noid or different board
if using the stock noid you'll have to widen the opening in the UL frame

[jonotwist]

updated, and ill keep adding things is they show up

[crzypntballer]

sticky pleasssseeeeeee

[NHBPaintball]

Just wanted to say yay i made it! I say sticky and I dont know why anyone never did this before

[fs8frenzy]

i vote sticky

[Vengefulstryker]

sweet thread

[jonotwist]

its been stickied in the "DIY thread"

[stevebski]

This definitely should be a sticky. I also don't agree with the way the holy law comes across. I agree with the thought behind it, but slapping somebody in the wrist for having a question is not the way to go about it. What ever happened to the only stupid question is the one unasked? I would put a note in at the bottom, that if you ask an intelligent question, there will inevitably be some 12 year old little POS that posts a reply bashing the original question. How about throwing a warning about expecting flamming?

[SmartParts5990]

nice list

[beastmar]

nice thread man

[Oscum Guy]

dude you rock!


and i agree instaed of threads like "how can i ul my shocker?". questions like "what solenoid do you reccomend i use to ul my shocker" questions like these are more rescpectable and might actually get answered