[shift521]

have an 04 fly and its chopping like every five balls, shooting a halo, wanted to know what my settings should be on the gun.
thanks

[Jay3240]

Before you start messing with your setting try using a different loader.The halo may be putting to much pressure on the stack of balls that its pushing the second ball in just enough for the bolt to catch it. Also try using a different paint.

[SunTzu3873]

2 things, adjust your ram ( read manual on how-to) forward as to a point where the bolt pin clicks against the back of the hammer-slit when closing the breech.

Maybe stretch your detent springs a lil, the Halo can double feed causing chops

[CKyXx87xX]

Originally posted by Jay3240
Before you start messing with your setting try using a different loader.The halo may be putting to much pressure on the stack of balls that its pushing the second ball in just enough for the bolt to catch it. Also try using a different paint.

yes try using a different loader before doing anything else...stretch out the springs in your detents and use the halo again if you can't get the time to use a new loader...