[MstrKey]

Just remember, you'll still need to get some backup orings.

[WildWayz]

From speaking to Jack, the only ones I need are:
011
012
014
015
14x2 (Although Valve shouldnt need them)

[Jack Rice]

The cup seal valve seals better - but is harder to install - using 14mm by 2mm

[MstrKey]

Originally Posted by Jack Rice

The cup seal valve seals better - but is harder to install - using 14mm by 2mm

I've always opted for the harder install personally. Once it's in there you don't ever really have to take it out if the seal is good. That's also why I've liked using dow55 on the valve orings. Lock that sucker down and play paintball.

[WildWayz]

Speaking of which, just ordered some Molykote 55 (Dow55) - gave my last lot away when I sold my Demon... been using Dow33 / MonkeyPoo since then.

[MstrKey]

That's fine. Dow 55 is meant to swell orings up a bit which is why I use it on the valve. I wouldn't use it on moving parts. Your dow 33 is fine for that.

[firefoxx04]

The invasion wont really care what you use for grease anyways