the offical dying your mask thread!

13pbstar13 · 03-24-2008, 02:48 PM

Ok I had these old profilers laying around i was going to sell them but I died them now i dont wanna sell them
they are like a dark wine color and aare super sexy!

13pbstar13 · 03-24-2008, 05:00 PM

It looks purple but its wine colored!

or

13pbstar13 · 03-24-2008, 06:11 PM

I was wondering if i took grey eze bottoms what would happen if I tried to dye them like green or something
or orange
or black
or red? answer back

JRoe123 · 03-24-2008, 11:46 PM

Quote:

Originally Posted by 13pbstar13

I was wondering if i took grey eze bottoms what would happen if I tried to dye them like green or something
or orange
or black
or red? answer back

they would turn black. grey like all colors can not be turned a lighter color

JRoe123 · 03-24-2008, 11:49 PM

Quote:

Originally Posted by Nepb2

any tips on how to keep the foam from picking up the dye.
someone said the powder works better?
still trying to figure out how to keep my foam from getting all screwed up

once you remove from dye immediatly place under cold water and use laundry detergent to scrub the foam. works beautifully

guzzo370 · 03-25-2008, 10:43 PM

if i dye over gold what would happen with , white, lime green, red?

coolcasemods · 03-26-2008, 12:13 PM

looking for ideas on the best way to go from light yellow to lime green

I was guessing using a blue dye and watching the mix until it turns the light green i am looking for... would that work?

larrimus · 03-28-2008, 08:02 PM

Just finished some new bottoms. Comments?

tenacious G · 03-30-2008, 01:13 AM

i got some blue n black jt proflexes; http://www.punisherspb.com/jt-profle...gles-blue.aspx.
do u think that process would work on the bottom part..the blck flexie part?

kingman756 · 03-30-2008, 11:16 PM

i have yellow events and want them to be lime green. wat colors do i need and how much?
thanks

rphipps84 · 03-31-2008, 10:51 AM

Quote:

Originally Posted by larrimus

Just finished some new bottoms. Comments?

looks rad.

Kowitz · 03-31-2008, 03:47 PM

Does anybody know for sure if grey flex 8 bottoms can be dyed black?

I need a %100 percent answer, not something like:

of course grey is lighter then black.

because my blue flex 7 bottoms wont dye black.(yes i did everything correct)

13pbstar13 · 03-31-2008, 04:04 PM

yes the gray will dye black. If u are unsure just keep it in the dye for a long time.

Kowitz · 03-31-2008, 04:09 PM

ok thanks!

rockinthespyder · 03-31-2008, 05:27 PM

so do u have to have clear or white parts to beable to dye?
also how do u do designs on teh parts?
thanks

wekillsuckers820 · 03-31-2008, 05:30 PM

reversed white....hottest grillz you will ever see!!!

kapp_badbloodz · 03-31-2008, 06:15 PM

how do you get the swirl effect? or is that just how it turns out?

if i had an old pair of white grillz... i would do lime green with the white swirl. that would be nuts!

larrimus · 03-31-2008, 06:40 PM

Quote:

Originally Posted by kapp_badbloodz

how do you get the swirl effect? or is that just how it turns out?

if i had an old pair of white grillz... i would do lime green with the white swirl. that would be nuts!

The swirl on the bottoms I did took some hot glue, black dye, a lot of patience and some very sore fingers (from picking off the glue).

bumpinblaze4x4 · 03-31-2008, 06:53 PM

Quote:

Originally Posted by wekillsuckers820

reversed white....hottest grillz you will ever see!!!
[img]http://img2.putfile.com/thumb/3/852132678.jpg[/im]

Why would you post painted grillz in the "official dying thread"? This thread is to provide pictures and information on how to DYE a mask.

wekillsuckers820 · 03-31-2008, 07:08 PM

oh sorry

guzzo370 · 04-01-2008, 06:56 PM