blowups, and troubleshooting stuff

PrettyPistol · 05-16-2002, 09:18 AM

Quote:

Originally posted by me262
shaft, (2 different versions)

is ne thing different needed for the other version?(i have the silver one).

oh, and how much does loctite run?

Thanx, this thread is prawly one of the most usefull i've seen!!
keep it up

me262 · 05-17-2002, 03:03 AM

here a pic of the other ram version with the snap ring. (like an angel)

PrettyPistol · 05-17-2002, 09:14 AM

THanx, that helps. my gun should be up an runnin better than ever when i get my o-ring kit and sidewinder from Blue!!
I'm really excited to play. by the way, it seems like not to many people have remotes. whats up w/that? it seems like one of the first tings to do would be to take uneeded weight off the gun.
thanx again for all the fixin up info. i have already used most of it.
is there ne thing on my gun that my Gold Cup gun oil would hurt?
and how easily are revys are affected by rain?

(i'd better get back to my HTML design. I'm in school right now. i'm in 10th grade and i finished my final project so the teach lets us surf all hour. these cable connections kick-a**)

Have Blue · 05-17-2002, 11:58 AM

One note on the old snap ring rams that I just discovered the other night - you can adjust the snap ring 'pressure' by the brass scew on the ram cap. Screwing it in (tightening) compresses the internal o-ring, requiring more pressure to build up behind the ram before it breaks free. Pretty crafty design!

The only thing to take note of is to make sure that some sort of sealant or low-strength threadlocker is used on the brass screw, else air will leak out the back when the ram is activated.

me262 · 05-17-2002, 02:01 PM

yep, just like an angel

heres a kinda weird thing, i decided to take one of the batts apart, local batteries plus will make them for me for 3 bucks a peice

Have Blue · 05-17-2002, 02:08 PM

I'm not rich enough to own an Angel myself, so I had no idea how the snap ring works (just that they have one).

Cool about the batteries - I didn't know they could do custom packs at those places!

me262 · 05-17-2002, 02:13 PM

i just stared at the drawings for awhile to figure the angel out.

then got hold of a few freinds guns.

i did have an lcd i had got in trade for the e-monster, but traded it within the same week for a couple more tribals

PrettyPistol · 05-20-2002, 10:05 PM

How is this looking?? I'm gonna LOCTITE IT now.

Kevin O'Dell · 05-20-2002, 10:12 PM

Looks good. Make sure that when you locktite it that you screw the hammer on completely with no threads showing.

PrettyPistol · 05-21-2002, 09:27 AM

should i put an o-ring on my AOC Plunger also?

Thanx

PrettyPistol · 05-21-2002, 09:32 AM

what exactly is the bolt link pin, (i am pretty sure i know but i am just checkin) it is what u pull out to take out the bolt. right?

Thanx

STEVEN DE LEON · 05-21-2002, 04:19 PM

Here are the dip switch settings for Tribals.
Just in case someone needs them.
Tried to post, but couldnt figure how to.
So go here
www.socal-paintball.com/tribe/dips.htm
Hope its helpfull to someone.

Kevin O'Dell · 05-21-2002, 11:46 PM

DO NOT put an o-ring on the aoc plunger! It already has all the o-rings it needs.

Yes, that is the bolt pin.

PrettyPistol · 06-04-2002, 09:21 AM

can u post sum pics on how to adjust the AOC? the explanation at socal-paintball was hard (for me) to understand. especially where exactly the screw is.
Thanx

Paint Bull · 08-08-2002, 06:15 PM

for some reason my aoc body wont come out....

did i pt it back in wrong....? it works, so i dont have it in backwards. or at least i geuss I dont....

but for some reason I cant get the aoc body out now?

what am i doin wrong this time?

warpedmephisto · 08-08-2002, 06:33 PM

Did you take out the vertical adapter screw? What method are you using to remove the AOC?

Paint Bull · 08-08-2002, 06:44 PM

yeah I took out the VA screw

last time I could stick a screw in, move the screw to an angle so it got stuck and pull it out....

that method doesnt seem to work now, nor does pushing from below

you got another trick?

warpedmephisto · 08-08-2002, 06:48 PM

I used to use an allen wrech, stick it in the hole, angle it, and it would pull right now. Then I used the Fury chip extraction tool, just use one leg and it works perfect. I'll try to get a pic up later.

Paint Bull · 08-08-2002, 07:07 PM

after 30 minutes of trying and listening to break stuf over and over i got it....

but now the next thing behing that is not comin out

huh? again · 08-11-2002, 08:19 PM

what ram is better?

thanks
-joseph

::edit:: no one knows?

TiMie74 · 08-23-2002, 10:07 PM

Quote:

Originally posted by Paint Bull
after 30 minutes of trying and listening to break stuf over and over i got it....

but now the next thing behing that is not comin out

I wanna tap that one hole for a screw size so it fits perfect. Then get a long screw. It would work so good.