[webbeat]

Wat is the max operation to ION from stock reg ??

100-150 psi ??
Max 175 psi ??

The guage reading is from 0 to 300 psi ??

Any difference if I use CP shorty reg ??

Thanks

[Adrenaline_Junkie!]

Not sure, i know the stock reg goes from 0 to at least 300. Why do you wanna know? A CP reg will work fine.

[PBfanatic2006]

I have that same Cp reg and it works great.

[MAE]

Why would you ever want it to go over 175psi anyways...

[spyder_king06]

you mean shorty reg...not shortly reg.

Anways, im not sure how high it goes. But that doesnt matter. You dont want to try this because it could lead to blowing the solenoid. The CP reg will work great with it.

I'd get the Long CP reg though.

[American-Dynasty]

thats true if you go over 175psi your shooting atleast 300 maybe more it wont do anything i have a cp on my ion and it works great

[a031363]

Do not put more than 200psi into your Ion. The usual top is 180psi if you do not have a QEV. Virtually any aftermarket reg like a CP, Torpedo, Detonator, AKAs, etc. will work since it is capable of outputting a sub-200psi operating pressure. Always remember, the very first time you attach a tank to a new Ion or after changing anything in the air system (QEV, Hose, Reg, ASA, Tank) YOU MUST TURN YOUR REG WAY DOWN BEFORE APPLYING AIR. If you don't you risk blowing hoses or the noid.

[webbeat]

Just bought one and want to understand more, in case things go south while in the middle of the game.

For instance, my Evil Pimp, they have clear statement that, operational pressure from reg to the marker need to run between 100-150 psi, but not exceed 175 or it will cause damage.

I wonder if ION have the similar warning, or Wonder what psi run this baby best.

Try my luck and see who know the best psi to serve this baby.

[webbeat]

Originally Posted by a031363

Do not put more than 200psi into your Ion. The usual top is 180psi if you do not have a QEV. Virtually any aftermarket reg like a CP, Torpedo, Detonator, AKAs, etc. will work since it is capable of outputting a sub-200psi operating pressure. Always remember, the very first time you attach a tank to a new Ion or after changing anything in the air system (QEV, Hose, Reg, ASA, Tank) YOU MUST TURN YOUR REG WAY DOWN BEFORE APPLYING AIR. If you don't you risk blowing hoses or the noid.

Cool man, you guy make this site awsome, kinda knowlege base for self-educate. Thanks

[PBfanatic2006]

Without a qev installed 150-170 psi is a good setting. Most people say dont go over 200 psi but my manual says dont exceed 180 psi. Once you have a qev installed, you can drop your input down to 100-130 psi.

[spyder_king06]

Get your Ion and try it out. All of them will be a little bit different depending on the circumstances.

Personally, I run my Ion at about 140-150 psi going around 265fps (because I play indoor). But if you play outdoor you might be allowed to chrony higher which would leading to raising the pressure.

[inspiron8500]

According to manual you should never go above 200