[kingofpoon]

I have a pyder flash I shot about 100 times on full auto the it started leaking I need to get into the regulator but can figure out how here is a pic of my gunhttp://awesomepaintball.tripod.com/Sypder-Flash.jpg

[Opteron-O3]

Is it leaking on the regulator or near the tank? My guess its either the tank oring or the striker oring

[kingofpoon]

No the reg is stuck shut I've tried a lot of oil but it's not letting free also the valve inside isn't like the newer ones that u take off with a penny it a solid round like a body valve

[kingofpoon]

It's been sitting for years I just bought it I figured it needs o rings but can't open it

[kingofpoon]

No one knows guess I'm going to just oder a new drop forward then

[The Inflicted]

I'm not sure I understand.
Are you able to remove the regulator from the gun?

[bigjohn141]

The reg is built into the Asa. You need to take the hose off and unscrew the silver front from the black part of the drop forward with a wrench to get into it. There should be a spring washer stack so pay attention on how they come out. You probably have a bad oring somewhere in there if it's been sitting for a long time.