[NEPxWeezy]

Yeah.. Donut has no lube on it and the LPR is set correctly. I couldnt set the HPR because it kept doing this in the chrono.

[gamer565]

Is it SC'd?

[NEPxWeezy]

Yes sir.

[specopsdeath2]

iv been thinking about this since you sent me this video a few hours ago.

only thing i can think of is that it is not sealing correctly. thats my only guess at this point :/

[NEPxWeezy]

I guess I'll call BLAST tomorrow, or Monday rather.

[Tabris17]

Replace the front blast guide o-ring and try it out after.

[Chi-town Blitzkrieg]

I had to complete pull my engine apart make sure the donut and oring are clean re lube everything but the donut with DOW 55 and it was good

[hipnopath]

The solenoid could possibly be sticking, try taking it apart and cleaning it/lubing it.

[Tabris17]

Taking apart a noid is a last ditch thing.
The previous threads on the waterfalling issue are either related to lube on the donut or the front blast guide o-ring.

[NEPxWeezy]

If it comes down to that I have a guy that is really good with bob long noids I will take it to.

By the way, this gun has probably around 500,000 shots through it (tadoa OLED had like 450,000 on the counter and ive put around 50,000+ on the stock board)
Noid was replaced around 400,000ish shots.

[NEPxWeezy]

Originally Posted by Tabris17

Replace the front blast guide o-ring and try it out after.

This was the solution. Works great now.

[samp]

Where is that I ring I have the same problem

[samp]

I mean o ring

[gamer565]

Originally Posted by samp

Where is that I ring I have the same problem

On the front blast guide like his post says...

[samp]

Ok that was a stupid question so here's another one which o ring is that o ring

[gamer565]

There are only 3 orings on the Blast guide, you have a 1 in 3 chance to figuring out which one it is. Or you could simply replace them all..



Hint: It's not visible from that pic that already show's the 2..

[samp]

So it's inside the supercharger thingy