Well we also plan to polish the heads, UL headers, uncatted UP/DP/catback.
Plus all turbo prep bull****.
Already have turbo inlet and CAI on.
Won't the headers and heads make up that extra 20/30 and put me in this high 300s? I've tried to monitor the build threads/proven power threads to understand some of these power gains a bit better.
And I do somewhat agree. We seem to have the design mostly down. Still a bit tough for people doing it on our own. Out of my league as I'm fairly new to engines but my dad has done rebuilds before. He has no issues with it.
Like I said about Hondas, I wanna get me one and learn how to work on cars very well fooling around with one.
__________________
Steam: N-Ur-Face
I see now that the circumstances of one's birth are irrelevant... It is what you do with the gift of life that determines who you are.
So... I totally misread the estimate on the engine.
7165 dollars out the door. Includes labor. Fffffffuuuuuuu that's a little outrageous
I mean, IIR has a short block with forged goodies for 2600
__________________
"Originally posted by slateman: Air Force . . . serious business"
MGDT: "Originally posted by Marine786: We had one guy get orders for a deployment while on a deployment."
AFDT:"Originally posted by f2f4: Or maybe he meant our exposed and aerated crotches. Privates. Because lord knows our PT gear only encourages "wardrobe malfunctions.""
You could pretty much replace the whole engine and drivetrain for that much...Could go version 7 ej207 with forged pistons for 3500 and sell what you don't need off of it.
Yeah the price is going to go down since I don't need the TGV deletes done cause I already have them. Idk what else tho.
But they are also installing all my performance products free while they're in there. I'm lost I really don't know the best course.of action. Insurance said no.dice on covering repairs
__________________
"Originally posted by slateman: Air Force . . . serious business"
MGDT: "Originally posted by Marine786: We had one guy get orders for a deployment while on a deployment."
AFDT:"Originally posted by f2f4: Or maybe he meant our exposed and aerated crotches. Privates. Because lord knows our PT gear only encourages "wardrobe malfunctions.""
Buy built block from josh.
Sell your current block. Yes, it will sell even as a ringland failure.
Get some chumps to help you install it....Coughmattscottnmecough.
...
...
Profit.
Speaking of those, ours went wonderfully. DIY for $10 or so and took about 30 minutes while they were out.
I wouldn't pay 7k for that though. Honestly. I know AWDTuning, here in Texas, has a damn well built block with almost everything in it for 7k installed that's a hoss.
__________________
Steam: N-Ur-Face
I see now that the circumstances of one's birth are irrelevant... It is what you do with the gift of life that determines who you are.
Coreys build... You can get some of the stuff listed for a cheaper price for sure, but just about everything is needed. The labor is a killer though.
AKUMA-STG1+-... New Subaru short block 2.5 l. Forged Subaru robs,
Forged Subaru Crank. Choice of CP, J.E. or Wieco
pistons.
1 3,099.99 3,099.99T
SUB-GATES-TI... Gates timing belt kit. Includes all necessary pullies and
tensioners. Includes water pump and non stretch timing
belt. For Subaru EJ motor.
1 399.99 399.99T
AKUMA-HEAD-... Head decking performed by Akuma Motorsports 1 380.00 380.00T
GRIM-LOW-TE... Many OEM style T-Stats can have a very negative effect
on your vehicle, if they fail, they fail closed and your car
will overheat. But not ours! If there is a failure with our
T-Stat, it will fail in the OPEN position allowing coolant
to flow and keep your engine temps under control.
1 53.99 53.99T
SUB-GAS-MOTO... Subaru engine gasket kit for 2.5L. motor build. Includes
head gaskets and all ancillary gaskets needed for the
rebuild of the Subaru EJ motor.
1 349.99 349.99T
LAB-GEN-FEE Hourly labor rate for goods installed. Includes
installation, inspection and verification of parts and
services.
19 90.00 1,710.00T
ARP-HEAD-STU... ARP headstuds for the Subaru. 1 239.99 239.99T
OIL-CHG-REG-4... Non synthetic, MOTUL oil for hi performance engine
break in. Full drain and replenishment of non-synthetic
oil up to 4.75QTS for 4 cylinder motors. Standard weight
oil. Includes OEM or better filter.
1 75.99 75.99T
COLNT-FLSH-4... Coolant flush for a 4 cylinder motor. Vehicle specific
coolant. Technician will inspect vehicles line, hoses and
coolant systems.
1 69.99 69.99T
TGV-SRVCE-STI Hand porting and deleting of the TGV flappers in
WRX/STI tumblers
1 250.00 250.00T
that was only the first page!!! theres more on the back half
__________________
"Originally posted by slateman: Air Force . . . serious business"
MGDT: "Originally posted by Marine786: We had one guy get orders for a deployment while on a deployment."
AFDT:"Originally posted by f2f4: Or maybe he meant our exposed and aerated crotches. Privates. Because lord knows our PT gear only encourages "wardrobe malfunctions.""
got 4500 set aside and hopefully selling some **** soon.
scott find buyers for 2 rotors. cheap!
EDIT: found these in philly last weekend
Then saw this at work on base today
HAHAHA!!!
__________________
"Originally posted by slateman: Air Force . . . serious business"
MGDT: "Originally posted by Marine786: We had one guy get orders for a deployment while on a deployment."
AFDT:"Originally posted by f2f4: Or maybe he meant our exposed and aerated crotches. Privates. Because lord knows our PT gear only encourages "wardrobe malfunctions.""
VETERAN MILITIA
Last edited by kapp_badbloodz : 10-11-2012 at 06:02 PM.
sick wiring skills by previous owner. Getting rid of useless external temp gauge. Only need a boost gauge but I have no clue what to cut and some are running to my boost controller. I've tried to trace some down but still. ****
I wondered why my gauge cluster lights were flickering and all my gauges stopped working. Need a new gauge cluster anyways meh
"Originally posted by slateman: Air Force . . . serious business"
MGDT: "Originally posted by Marine786: We had one guy get orders for a deployment while on a deployment."
AFDT:"Originally posted by f2f4: Or maybe he meant our exposed and aerated crotches. Privates. Because lord knows our PT gear only encourages "wardrobe malfunctions.""
My 0302 was from a fault connection leading to the coil pack. Got it patched up and it's running good now. You might check that, because you can diagnose that without pulling the bay apart. There's a connection leading to them about an inch away. Fiddle with it and see what happens.
Quote:
Originally Posted by kapp_badbloodz
total is like 7147.53
got 4500 set aside and hopefully selling some **** soon.
scott find buyers for 2 rotors. cheap!
EDIT: found these in philly last weekend
Then saw this at work on base today
HAHAHA!!!
__________________
Steam: N-Ur-Face
I see now that the circumstances of one's birth are irrelevant... It is what you do with the gift of life that determines who you are.