This system would be bad *** on the powerlyte autococker that had the ram inside the body. Maybe to make it more streamline find a ram that has the mount on the other end?
you can get a ram that mounts the other way but then you have to move it away from the body more to clear it then you cant use standard cocking rods or use auto trigger. plus your hoses get longer and the longer your hoses are the more of a pressure drop your going to get at the end of them. then your ram slows down or you have to increase the lpr pressure. lots of +'s and -'s to every design but I think the arrangement keeps more +'s than -'s
you can get a ram that mounts the other way but then you have to move it away from the body more to clear it then you cant use standard cocking rods or use auto trigger. plus your hoses get longer and the longer your hoses are the more of a pressure drop your going to get at the end of them. then your ram slows down or you have to increase the lpr pressure. lots of +'s and -'s to every design but I think the arrangement keeps more +'s than -'s
Valid points, it can't be that hard to make a pump arm, but I didn't think about the pressure drop with longer hoses. Regardless, this is a kickass system you have.
how would that work, the 3 way wouldnt recock it the 2nd time
__________________ Inspire Photography <-- My photography page Boneyard Paintball in Plymouth, WI Stinger Paintball Designs for your custom grips
"Reminds me of the kids that bolt on exhausts, wings and vinyl cutouts onto their rice mobiles and then hate on a ground up resto rodded 69 Camaro" -OPBN
"Due to the Berzerkers rep and knowledge of Mag awesomeness, the opposing team dropped their markers and are actually out of the frame curled up in fetal positions" -OPBN... Again
sorry in advance the video quality on this one really stinks but hopefully you get the idea
in this video I am finishing the back side on the right and the front side on the left. once its done on the right I can flip it over and clamp it right into the right. and the one that comes out of the left only needs to have one hole done on the hand tapper and its done.
my little mill cant really use an atc. One day I would like to upgrade to something with an atc but for now its just not in the cards. maybe if I can sell 1000 of these kits then maybe it would make sense for now though r8 is still the way to go.
I really wanna know if you can use that at that speeds. Is there anything out that can keep up with him
ps - koa mentioned that its more or less impossible to feed. Said he was working with a flow control valve to slow it down... then I didn't hear anything else.
__________________ Closed Bolt Ballers
Jack Wood:
And I think that if you think something is bull****, you have every right to say you think it is. Just because bull**** is the norm doesn't mean it stinks any less.
Your Privacy Choices