Ok, so i just got this etek 2 in. As soon as I air it up, i hear a leak from the grips. So on went the stripping down, cleaning, lubing, and puting it all back together. No orings seemed damaged and all were lubed appropriately. Pressure should be fine. LPR is flush.
So now im at a stall, I though it was the gasket for the solenoid manifold but now after looking at the leak, i am thinking other wise. I will attach 3 pics with drawn in orientation markings to try and explain whats going on. The marker does cycle and it feels like its putting enough pressure out to throw a ball down the field. So i dont think the noids bad. What the heck could it be???????????
here the solenoid lays untouched and just straight up leaks. i can feel air blowing out towards the back end of the gun
when i pull down, the leak stops or is almost unnoticeable, but as soon as i release from pulling on this section the leak goes full blast again.
this area circled is where i believe the leak is coming from, forgive me for my poor line drawing skillz in paint
can anyone help me with this, or has anyone had the same problem. i am trying to avoid replacing the noid. hopefully its just the gasket but where the leak is coming from makes me think its not the gasket.
any help would be greatly appreciated! thank you!!!
Disregard!!!!!!!!!!!!!!!!! Solenoid is shot