[Predator]

what is your favorite mod for your M98??? What kind of set up do u have?

[moodydoody]

cannon barrel my freind did this and it is so stinking noisy. scared the crap out of my other freind.

[sorisko]

My dad has a model 98, and we have a nice setup on it... There is a 16 inch barrel on it, and it is a very nice mod, the noice isnt bad, and the distance and accuracy really increaced from the original barrel...

[dager]

not really a mod but polish the internals, polish and rework of the trigger setup.

[Predator]

as of right now... i have a psyco ballistics rocketcock, 16 inch all american, 9v revvy. and a BOA cocealer. and i love each one...

[dager]

boa concealer? what threads you running.. they never made them for the M98

[JohnnyRyall8]

My favorite mod is the milling of the gills. it has a cool look to it.

[Tapioca]

I would say a barrel.. For the M98 the barrel is one of the most important things you could get upgrade wise that would inprove the performance of the gun!

[Tapioca]

Originally posted by JohnnyRyall8
My favorite mod is the milling of the gills. it has a cool look to it.

It may have a good look ( I must admit) But in the long run u will be paying for all the dirt in your barrel and in your gun!

[bigd16]

I like:
-2x trigger
-rocket cock
-pb drop
-lapco bigshot
-lapco RVA

peace out

[Pointed Stick]

It won’t improve the performance of your gun, but my favorite modification is a SiN custom paint job. You can’t beat the price either.

Cheers!

[Siva]

drop, maddmann springs, dbl trigger & revvy make one sick 98. polished internals help a little 2 if you do it right.

[poops66]

i like the 2x trigger. it reely does help it times of desperate rapid fire and i like that flatline. i makes it go like 100 ft farther, its got incredible accuracy. the only downside it that u need 2 be picky on gettign good quality paint like PMI and marblizers and that u should do a good job on the installation. thats what matters. if u dont install rite, u wont see results. but when u get it right, boy does it purr like a kitten.

[Tippmann16]

hey i have a lapco velocity adjuster, and a labco drop forward, also a flatline barrel (that i love), scope

[IcEy]

Mine would be a barrel. My setup is in my sig.

[Mittenz_The_Kittenz]

ok my fav's are:
1) J&J Barrel
2) PB Drop Foward
3) 2x Trigger
See my Sig for my Setup.

[Meph]

My favorite.... my Psycho Ballistics electro-pneumatic upgrade. One of too many upgrades on my 98, but that one is my favorite. With a close second to the polished stock barrel (long story/reason).

[SiLeNt 98]

my 12 in J&J is the Best!!!!

[Dyoel182]

Either the LP or RT kit. Electro is nice and all, but it comes at a price.

[no1beefcake]

My 16" CP barrel is hella-accurate!

[kypaintballer]

http://community.webtv.net/jDriverHPS

As for the vert feed, it will only work with the Em98 kit due to the conecting rod being able to be adjusted. In order to make a vetical feed for a standard 98, you'll need a slightly shorter rod. As for the side hole where the balls used to feed, I used JB Weld to to fill it in, then smoothed it out.
I'll try to write more on how it was done when I get pics up.

Gatorchris: I was thinking the same way about the hopper not being stable as I was working on the gun. What I done here was drill a hole 1in. diameter for the feed port and added a 7/8 plastic bushing that I cut from an old elbow. The 7/8 end of the elbow is slightly larger than 1in. so when the body halves are put together, it make for a very tight friction fit that won't come out. By using the 7/8 bushing, you can actully thread in a Angel high rise. But for right now I'm using a straight elbow adapter from a SL68II pump. So far there are no problems with it coming apart.

it is so cool im have the mod done!!!!!!!!!!!!!!!!!!

go team ridge boyz and team ridge boyz 2