[imped4now]

Don't remember....I keep a lot of that stuff around. I've got nylon-tipped SS screws and complete nylon screws. I installed a nylon screw in the Legend (6-32) and run the nylon tipped SS screw in the Violent trigger. That's one thing I love about the Quest--the post travel adjustment isn't making contact with the frame.

I probably picked them up on ebay or mcmaster-carr.

[Demo2222]

gonna have to find some- my g6r is begging for one.

[imped4now]

For such a small, cheap item it definitely makes all the difference. I don't know why all manufacturers that care about the quality of their triggers don't include them. One case of paint through a gun with a normal SS set screw leave you with a bare spot on the frame that will continue to wear over time.....no thanks.

[eatafetus]

Well this sucks my wife's school district is probably going to strike in the next week or so that new quest that I bought and got up and running looks like it's going to get sold.

[eatafetus]

https://www.pbnation.com/showthread.php?t=4050895

[Demo2222]

there is a fellow with a wtb quest thread in the wtb section...
not sure if he is looking for a legit price or a pawn price but worth pursuing I think

[eatafetus]

ok thanks

[imped4now]

So people get all caught up in how much 'smaller' the 07 Cyborg is than the 06.

Bottom to top of grip frames:
06--4.75"
07--4.625"

Height of body (measured to feedneck area, which is the highest point)
06--2.25"
07--2.25"

The width is nearly identical. The length is identical, with the only difference being in the 07's shorter ram cap. The weight is nearly identical. They're the same darn guns with the only discernible difference being in the more continuous frame-ASA transition. Just in case anyone was curious.....everyone knows they're the same gun internally but I always thought the dimensions were a little further apart than that.

07 on top of 06 with bottom of grip frames lined up




And here's why I love the Legend (on top of 07)


It's a full 1/2" shorter in height, has the same frame-reg gap, and is shorter in length. It's still the nicest feeling gun I shoot. It may not be quite as silky as the Borgs and Quest but the feel is excellent.

It's even shorter in height than the Quest


All 4


The 06 and 07 with their respective Lurker barrels


Don't mind the 07's ASA. I've got a matching gloss black Droid/RX style ASA on the way.

[ironyusa]

Oh yeah... well the 07 looks better!

[imped4now]

I don't disagree.....and this particular example looks fantastic.

[Demo2222]

hey yellow- check this one out-
http://www.ebay.com/itm/WORR-GAMES-BOB-LONG-AUTOCOCKER-PAINTBALL-BODY-/231106845278?pt=LH_DefaultDomain_0&hash=item35cf0a 9a5e

[ironyusa]

I found some spyder bodies on eBay for like $10... Guess I'll pick one up as the starting point for my project. Hope it's similar in geometry to an azodin body because I can't find just the body.

[Lurker27]

new spyders are 11/16" both tubes continuous I believe

[ironyusa]

Sweet, thanks! Any idea where the bolt/ hammer keyway begins? It's going to take some creativity to route the air from the bottom tube to the top without modding the body, but my goal going in is to make it a drop in kit.

[YeloSno]

wait, so that means we can put a valve in the upper tube?

yo dawg, I heard you like mechanical valves....


and that's awesome! I'll be stoked to have a Nurv 07, then, and it should substantiate my emptiness from losing my last Legend. yes yes yes

[imped4now]

Originally Posted by YeloSno

and that's awesome! I'll be stoked to have a Nurv 07, then, and it should substantiate my emptiness from losing my last Legend. yes yes yes

You getting a Nurv?

Taking offers on the Quest if anyone wants it....price will vary depending on grips, ASA and bolt/bolt pin configuration.

[ironyusa]

Originally Posted by YeloSno

wait, so that means we can put a valve in the upper tube?

yo dawg, I heard you like mechanical valves....

Nah, it would be the MQ project.

[Fallinher0]

Slap the low-rise feedneck on the 07 borg and you are good to go.

[team_Static_Age]

Man I found this quest in the garage while cleaning out. The feednwck threads for quest is what again? The bio feedneck doesn't grip my rotor correctly

[Fallinher0]

It has its own threading. The only aftermarket is critical.

[ironyusa]

You guys see this:

Originally Posted by ThinAirSports

I'll just leave this here