Official XSF Board Thread

the trooper · 08-13-2004, 07:59 AM

This is the OFFICAL XSF BOARD THREAD. It is designed to help inform others on Fuctions, Updates, and Troubleshooting, with the help of the manufacture and others that have knowledge of the product. If you have a question or concern, post it. If you have a solution or suggestion, post it.

If you bash or flame in this thread you will be banned, so consider that your warning.

the trooper · 08-13-2004, 08:03 AM

The XSF Board will increase your Rate of Fire and give you Eye capability. To learn more about this product visit
www.XSFadvantage.com

FDR · 08-13-2004, 05:11 PM

wats the advantage of the XSF 50g switch with that metal arm coming down off it? is it better to get this switch?

drknow · 08-14-2004, 10:25 AM

It makes the trigger pull lighter. Personal preferance. Will probably help you shoot a little faster.

FDR · 08-14-2004, 12:21 PM

thanks yo

TurpentineDreams · 08-14-2004, 01:26 PM

I would recommend a switch rated to 50 grams withoug a lever. You can get basically any waight you want of switch from the omron site if you want to solder, and I bet theres other places with switches for sale.

Ruddy9875 · 08-14-2004, 07:10 PM

if you face the lever up and put a set screw right on the end, if you hold it right it will bounce like CRAZY ... i got my switch (same one) from radio shack and i love it :-D

FDR · 08-14-2004, 08:23 PM

ruddy, will it fit in a spyder upside down though? do the pins you have to put thru it line up then?

corvettez06luvr · 08-15-2004, 10:30 AM

with myne i just extended the wires and then made the lever face down so on my sweet spot the udjustable part can hit

and i am willing to bed my piggy bank its lighter then anyone elses in here....i mean the switches without a lever. haha

Ruddy9875 · 08-21-2004, 10:02 PM

yes, it fit my amg perfect either way, same with my freinds e99 ...

linty · 08-23-2004, 07:21 AM

i have a question will the board work on spyder clones like the e-icon? also could i put it in a viewloader oirion that has been upgraded to elctro?

the trooper · 08-23-2004, 07:39 AM

If you used a Spyder ESP on the orion, then yes it will work. Last year I put a ESP frame on a BE Avenger and it worked fine, and since your just putting eyes on it you should be good to go.

Yes the Icon is the same spyder frame.

linty · 08-23-2004, 07:42 AM

ok thank you

TzeentchianGod · 09-02-2004, 12:19 AM

Hey, Trooper! Where's your review?

the trooper · 09-02-2004, 05:17 AM

Haven't had enough time in between hurricaines. Sorry for the delay.

protoformx · 09-02-2004, 05:17 PM

I just orderd mine today and it should be here next week sometime. any tips or tricks that people have found? with instulation or with settings?

gonzo5187 · 09-02-2004, 07:47 PM

where to buy? can u send in ur gun to get everything installed?

the trooper · 09-02-2004, 08:00 PM

you will need togo to there site and find out.
www.xsfadvantage.com e-mail them for a list of installers.

Everyone else this is not a small talk forum, keep your comments to yourself.

kevo1994 · 09-03-2004, 05:17 AM

for instalers go to the custom service's thread

furyskater16 · 09-03-2004, 03:18 PM

COST? you can delete this if u dont find it necissary to be in here..... but do i have to call them to order or what... and again how much is it?

stupidlikeaf0x · 09-03-2004, 04:59 PM

If I'm not mistaken, the XSF board is $125. A bit overpriced. There are cheaper options, but whatever floats your boat.