[Heafis123]

cool this is very helpful

[JayFlip]

Is the OP accurate for tuning for a pooty-mod 2.0 core with rhino spring as well? (Not pink/blue pooty set)

[digital sol]

Originally Posted by JayFlip

Is the OP accurate for tuning for a pooty-mod 2.0 core with rhino spring as well? (Not pink/blue pooty set)

Yup, information remains relevant regardless of bolt/spring/can combination used. Pro's & Con's remain the same. Im still here, just do more forum lurking than tech'ing as of late.

[digital sol]

Originally Posted by XSP_junkieX

just got my luxe and am wanting to mess with the manifold but is it recommended to start turning inward from the position its in or start from flush like other adjustments

Id start flush and work your way in

[JayFlip]

Originally Posted by digital sol

Yup, information remains relevant regardless of bolt/spring/can combination used. Pro's & Con's remain the same. Im still here, just do more forum lurking than tech'ing as of late.

I've been busy with school and haven't gotten around to it yet--will your everyday set of allen keys that comes with a marker, or dye multitool, have the manifold screw size? Or do I need to go buy one? .050, am i correct?

Additionally, what is the difference between a manifold and ft? Is it something you buy and put it, or does a luxe have both? One or the other?

EDIT: Searched and found answer to my above question, which brings up a new one--is it more beneficial to have the ft in or out? (1.0 with 2.0 pooty core with rhino). Does it just affect cycle rate? Will that change what settings I use? Marker is quite a few years old and broken in, and I'm from Canada--if that makes a difference.

[inboxfull]

Hi,
im having a hard time to understand the meaning if Flush.
it mean fully close (clockwise directions) as starting point until it stops.
then turn about 4-5. (anti-clockwise) for the tuning.

Correct?

[Ty29]

Originally Posted by inboxfull

Hi,
im having a hard time to understand the meaning if Flush.
it mean fully close (clockwise directions) as starting point until it stops.
then turn about 4-5. (anti-clockwise) for the tuning.

Correct?

Flush means the part of the screw facing you is screwed counterclockwise towards you so that the top of it is even (or flush) with the surface of the thing it's screwed into.

It's not the same as flush like flushed down to the bottom.

EDIT: Dude question, is Malay your first language?

[inboxfull]

Originally Posted by Ty29

Flush means the part of the screw facing you is screwed counterclockwise towards you so that the top of it is even (or flush) with the surface of the thing it's screwed into.

It's not the same as flush like flushed down to the bottom.

EDIT: Dude question, is Malay your first language?

Hahah. yes it is. how did u figure it out?

Thanks alot. finally

[Ty29]

Originally Posted by inboxfull

Hahah. yes it is. how did u figure it out?

Thanks alot. finally

Your English made me wonder, so I looked and it says you're in Brunei, which is on the island of Borneo right?! To think that they have paintball there is awesome.

[Charron33]

Hey guys, im a bit confused here, I have a Luxe 2.0, about 5-6 cases through it and I want to tuned it. But here my main ''problem'', my fsd compensation is factory settings to 20ms, why lower year luxe have a lower fsdo settings (7ms) ? I currently turn clockwise 3 times my manifold screw, upped my dwell to 14ms but dont want to play with fsdo since its not the same as you guys... Dont want to screw things up !
Help please ?

[Vinh2599]

So I screwed in my manifold all the way and my luxe definitely shoots smoother and still has a consistent stream without drop off. Is that supposed to work like that? On my old luxe it was about 5 turns and it started dropping off.

[digital sol]

Originally Posted by Vinh2599

So I screwed in my manifold all the way and my luxe definitely shoots smoother and still has a consistent stream without drop off. Is that supposed to work like that? On my old luxe it was about 5 turns and it started dropping off.

Yea every luxe can have different results, process is the same

[leggomyeggy]

everyone still in the thread just checking gonna try these settings tomorrow, in can i have any prob gonna need your guys help

[digital sol]

Originally Posted by leggomyeggy

everyone still in the thread just checking gonna try these settings tomorrow, in can i have any prob gonna need your guys help

Yup, still around!

[xCrU3LtYx]

For those of you new to or just got a new luxe and want to tune it. Don't touch anything until you've put 12-15 cases through it. You want to break in the gun on the settings dlx sent you. Those settings will work forever so long as you stay up to date on regular maintenance. Problems begin to arise when people start tinkering. That's not to say that tinkering is a bad thing or you shouldn't do it, it's just that breaking in the gun properly allows maximum gains from tuning and will increase the longevity of your marker.

[leggomyeggy]

kinda comfuse of this lol (i am a retard) so do i turn my manifold to 4 turns in, then put my dwell to lowest then raise 1ms each till i get the sweet spot an shoots the same fps that had before then raise to 1-2ms so no problems on field, can someone please tell me the steps lol from start to finish thanks, (i read to much for my brain to handle)

thanks

[Pimmen]

How do you manage to screw it in 8 turns, mine bottoms out at 5, I have a 1.5

[Steve M]

Originally Posted by Pimmen

How do you manage to screw it in 8 turns, mine bottoms out at 5, I have a 1.5

I couldn't get beyond 3 without it impacting rof.

[leggomyeggy]

kinda comfuse of this lol (i am a retard) so do i turn my manifold to 4 turns in, then put my dwell to lowest then raise 1ms each till i get the sweet spot an shoots the same fps that had before then raise to 1-2ms so no problems on field, can someone please tell me the steps lol from start to finish thanks, (i read to much for my brain to handle)

thanks

[CustomProductsRich]

Originally Posted by Steve M

I couldn't get beyond 3 without it impacting rof.

That is correct. The persons telling you to do this have no idea what the hell they are doing!

[TNNCWill389]

Good base line to start with. Def helps alot