[Max S]

Once you glue the rendition magnets in your trigger with the glue that came are they in there for good or can you pry them off? I want to see what they feel like in my f8 trigger before I buy an f7 trigger.

[IntenseImage]

Its only superglue -- if you can get under and edge you should be able to pop em out

[rottensquad07]

Acetone will dissolve superglue so you should be fine

[Makaveli]

It's a pain in the *** and acetone doesn't really work. You can take a chisel and smack it a few times and it will come off. The easiest solution is to line it up correctly the first time.

[rottensquad07]

What are you talking about, Acetone has worked great for me

[Makaveli]

Acetone works well if you get superglue on your skin, but if you glue metal to metal it is kind of hard to get it in between the two parts. If it worked for you I am glad, but as someone who has tried it a few times it isn't the magical cure people say it is.

[xmc1146]

acetone will also take paint off if not use properly.

[xluben]

Originally Posted by IntenseImage

Its only superglue -- if you can get under and edge you should be able to pop em out

You don't even need an "edge" to pry on. If you can just push on the side of it
you should be able to create enough shear force for it to come right off (and if
the glue is fully dry it should come off completely clean.