[ranman106]

Can this be done? I have a complete Ion with virtue board and an extra Epiphany trigger frame that is complete along with an empty body shell. I would love to take everything from the Ion and put it in the Epiphany.

[ousooners]

Yes it can be done

[ranman106]

Thanks Ousooners, I'm going to do this as soon as I get the o-ring kit in and rebuild the marker!

[ballahamman32]

Just don't use a stock board with an epiphany

[theblindchicken]

Originally Posted by ballahamman32

Just don't use a stock board with an epiphany

He can use a stock epiphany board (which is in the epiphany grip frame already), but not a stock ion board (he has a virtue board in the ion).

[ranman106]

Ran into a few delays. Need Epiphany frame screws and a new battery harness since the ground wire came out of the plug that attaches to the Virtue board. Also, running into a few issues with the power button.

[theblindchicken]

Originally Posted by ranman106

Ran into a few delays. Need Epiphany frame screws and a new battery harness since the ground wire came out of the plug that attaches to the Virtue board. Also, running into a few issues with the power button.

Call or email virtue. They sent me a couple harnesses for my epiphany redefined board a while back because mine broke.

If the power button is broken, you can either attempt to replace it yourself or send it in and utilize virtue's lifetime warranty.

For the frame screws, do you mean to mount the frame to the body/internals, breech screw, or grip screws?

The body/internals & grip frame screws should be able to be found at a local hardware store. The frame screws are approximately the same length as the ion ones, except the head diameter is smaller to fit in the frame.

[ranman106]

Originally Posted by theblindchicken

Call or email virtue. They sent me a couple harnesses for my epiphany redefined board a while back because mine broke.

If the power button is broken, you can either attempt to replace it yourself or send it in and utilize virtue's lifetime warranty.

For the frame screws, do you mean to mount the frame to the body/internals, breech screw, or grip screws?

The body/internals & grip frame screws should be able to be found at a local hardware store. The frame screws are approximately the same length as the ion ones, except the head diameter is smaller to fit in the frame.

Frame screws to mount the frame to the body, the two around the trigger. Thanks for the Virtue info. I'll call.

The power buttons not broken. The problem is the Ion push button engaging the push button on the board.

[Punisher068]

Get a Ion XE one from ANS,they replace the,stupid sticker with a plastic button,they're like $5

[theblindchicken]

Originally Posted by ranman106

Frame screws to mount the frame to the body, the two around the trigger. Thanks for the Virtue info. I'll call.

The power buttons not broken. The problem is the Ion push button engaging the push button on the board.

The trigger is held in via two conic set screws.

I'll bet someone still carries an epiphany power button. Virtue still sells some of their power buttons which is a combination of the ion an epiphany style power buttons.

[METRO32168]

Done it without issues