NEW!!! Angel LCD CR123 Conversion Kit!!!

Slayer79 · 04-02-2012, 04:35 PM

I am definitely interested in at least two sets. How much do you think these will go for?

Trevor · 04-02-2012, 04:40 PM

A quick video should be done to show the installation and what it entails.

Slayer79 · 04-02-2012, 04:46 PM

And out of curiousity, are you looking for possible bodies to use as test mules or guns with boards? I have an a4 body from a parts lot, a trashed speed body and I have a C&C IR3 with no internals.

Dark Hunter · 04-03-2012, 07:38 PM

Received my kit in the mail yesterday. Thanks for the super fast shipping. I installed the kit in an IR3. I grounded the kit to my on/off switch mount and it works great. Thanks again!

travis.taylor10ee · 04-04-2012, 09:11 PM

Thanks Hunter! Good to see that these will fit IR3's as well.
Any recommendations as far as the kit goes? Modifications? Quirks?

projectxpaintball · 04-06-2012, 11:27 AM

I want one. Pm me with purchase details.

Dark Hunter · 04-06-2012, 01:29 PM

Fit and finish was good. The ground spring was a little big for the rear screw on the solenoid cover on the IR3 so I unwound the spring a little and screwed the power switch on top of it. My gun has a custom anno on it which was pretty thick so it took some good sanding to get the ground right. Thanks for making the kit, its a lot better then the adapter for CR123's I put together (-:

travis.taylor10ee · 04-09-2012, 07:09 PM

doesn't look like I can PM you projectx. I just need an email to send a paypal invoice to...

use2bgood · 07-02-2012, 03:41 PM

Thanks Travis this kit is awesome!!!! Keep up the good work!! Sincerely Dwayne Warren

bigballsofpaint · 07-02-2012, 08:53 PM

if this ever gets done for an LED count me in, i dont have a charger so its basically as paperweight

manfred · 07-03-2012, 04:38 PM

Are you also offering installation on these?

poilux · 08-11-2012, 12:27 PM

Hello, do you accept to ship 2 kits to France?
I pay whith Paypal.
If you are OK, just tell me how much for shipping cost.
Thanks.

th3p0stm4n · 08-26-2012, 04:21 PM

Nice job! I need a couple of LCD battery's myself!

travis.taylor10ee · 08-27-2012, 10:05 PM

Apologies to all who have wanted a kit for the past month or so!!!
I just got back home from another business trip. Thanks for your patience!

bigballsofpaint - PM'ed you

Poilux,

I'll look into shipping costs tomorrow. Looks like you can't PM yet so shoot me an email to: travis.taylor10ee@gmail.com

th3p0st4n,

Looks like you can't PM yet so shoot me an email to: travis.taylor10ee@gmail.com if you'd like to order...

Again, thanks for everyone's patience! I've been finding myself out of state more and more lately. Fun, but sometimes quite inconvenient....

mrfreez82 · 12-07-2012, 08:12 PM

i need one of those also

sledneckforlife · 12-08-2012, 08:16 AM

id be interested in one also. Thank you . Brad

mrfreez82 · 12-10-2012, 11:50 PM

aparently my pm wont work either
chrisstawski@hotmail.com for the wuote with shipping to canada if possible

ranman888 · 02-07-2013, 05:42 PM

did you run out of these i want a kit

trancer23 · 02-07-2013, 09:50 PM

If there anyway these can be used in an 03/04 speed? I know the Lpr complicates things.

Winnebago · 02-11-2013, 08:16 PM

unless he has updated his kit, it doesn't look like it will work for the 4.8v angels.
Since he designed it for the LCD/IR3... the parts are sized for the entire battery tube as well as using an end cap for the negative terminal.

so...
1) white positive spacer is too long
2) 4.8v batteries go in from the back of the gun... so you can't use the end cap

that being said...

6v battery sticks - 5x1.2v 1/3A
4.8v battery sticks (speed/a4) - 4x1.2v 1/3A
4.8v battery sticks (g7/fly) - 4.1.2v 2/3AA

1/3A and 2/3AA are all the same length... 2/3AA is smaller diameter than 1/3A.

So to use his kit:
1) chop off the white spacer piece a bit
2) figure out another way to attach the negative terminal