[larmiguel]

No I got them from oring monkey but the ones that did not match I re-use them.

[larmiguel]

Sorry, I forgot to readjust the air setting. It works good now.

[SHOOTNPOO]

Ok great. Glad it was simple fix

[larmiguel]

Sorry the leak is still there at the feed neck but it is so little that you can verly heard it.

[SHOOTNPOO]

Pull the bolt out does it get louder?
It can be a few things
Inner valve body needs rebuilt or the lp poppet needs to be rebuilt.
I recommend you buying factory orings for the creed as we have a full marker 2 times rebuild kit.
Www.vanguardus.com

[larmiguel]

yes it does.

[SHOOTNPOO]

Need to rebuild valve or poppet with correct orings

[larmiguel]

Thanks for all your help.

[SHOOTNPOO]

No problem

[larmiguel]

How can I print the Oring Chart? I just hit print and it was too small.

[SHOOTNPOO]

You need to change your printer settings to say actual size

[larmiguel]

Thanks. I had a 009 in stead of the 010. Thanks for all your help.

[SHOOTNPOO]

No problem

[Sick420]

Is it time to replace this bolt? It is worn all the way around as you see. I fell that it causes Fsdo when I let it sit for a while. Fsdo settings are 10 seconds & 1.5

[SHOOTNPOO]

Make sure you are using Dow 55 it will help?
That wear is not enough to do anything. What u can do is send the bolt to me and I'll get it polished. Or u can send to Pooty and he will do it.

[Sick420]

Been using DOW55 since you serviced it a months back.
Thanks

[SHOOTNPOO]

You can change out a few orings and polish bolt.
806 oring on guide
019 inside rear of Can and he Black buna 017, 3rd oring inside can.

[tr4mm]

Hi,

I just used my one creed for the second time today. I notice something a bit strange. So the first thing I did was I changed the board settings to default.

If I follow the instructions for tuning the velocity, my shots come out very slow (lets say 200 FPS). I cant get the velocity up unless I tune it with the HPR (which you say not to do).

I may just send it to you to figure out, but I was wondering what you thought first.

BTW it shot very nicely both days I have used it, I just feel Im doing something bad to the gun.

[SHOOTNPOO]

Are you running lp or hp tank?

You may have an older HPR reg. it could be that you have to go 2 turns out then adjust LPR for fps

[tr4mm]

Originally Posted by SHOOTNPOO

Are you running lp or hp tank?

You may have an older HPR reg. it could be that you have to go 2 turns out then adjust LPR for fps

HP tank. That would be about what I did. Its a V1 creed I believe with V2 parts

[SHOOTNPOO]

Yeah, between 2 and 3 turns on HPR for a V1 creed.