[tacxplosion]

With the 2k5 block, you'll need to drill and tap for an alias set screw (5/16" - 24 X 1/4"), with an empire/trinity/evil block, it will use a 10-32 screw to affix the block, same as most spyder clones (make sure it's not M5 though, as with spyders and possibly the piranha you have).

[GrAzIaNo]

Ru talking about the set screw on the bottom? I have a 2k5 and that setscrew fits perfect as is.

[tacxplosion]

If it fits and keeps it still, then no mod is needed.

[GrAzIaNo]

Got a harness....so all that's left. To get is....

Lpr
5 barbs
2 grip frame screws
and a trigger pin

[GrAzIaNo]

im looking to trade my species trigger guard for a empire guard if anyone is interested let me kno!

[tacxplosion]

Post it up on IOG's (intimidator owners group) BST, should be gone within the day if it's reasonably priced, maybe even less if it's a straight trade.

[GrAzIaNo]

http://www.intimidatorowners.com/for...012#post125012

done

[GrAzIaNo]

I think I have everything on the way except 2 micro switch screws and 2 ram orings and some tube.... just got my harness with swtch and etc in and im waiting for my lpr and barbs and trigger pin to get here! also traded my current trigger guard for a trigger guard I want!

[GrAzIaNo]

I got barbs, hose,trigger pin lpr and traded trigger guards...I just orederd two microswitch screws. 2 ram orings and 2 grip frame screws from bob long and they are on the way. that will be the last of what I need...should be assembleing this marker very soon!

[GrAzIaNo]

also a kool dude from the PMI section sent me another detent cover and screw for free! I drilled holes for the detent and screw and added a detent. it now has detents on both sides!

[GrAzIaNo]

new pic added!

[GrAzIaNo]

What do you guys think I should do as far as anno? Im thinking stick anno or leave it as is. Im not going to pay for an expensive real anno, would defeat the purpose of this cheap build.

[GrAzIaNo]

I picked up a og dye stainless steel barrel for this gat for 15$ via someone off facebook...total invested so far =115$ and a halo hopper.

[GrAzIaNo]

all I need to do is cut down my lpr retaning screw and drill a hole for for the back grip fame screw in the frame. waiting on two orings and two barbs from boblong that they did not include in the first shipment DOH!

[tacxplosion]

Are the frame holes not lining up with the body's? with a spyder it's drop in save for using M5 threaded screws.

[GrAzIaNo]

It was just slightly off I jus finished redrilling a new hole. Then cut down my lpr block screw. Everything is all set to go! Jus waiting for my 2 barbs and 2 ram sleeve orings and then assemble!

[GrAzIaNo]

here you go guys its all finished...

[GrAzIaNo]

just need to get a whole bunch of boblong stickers to make a cool sitcker anno!

[tacxplosion]

Originally Posted by GrAzIaNo

just need to get a whole bunch of boblong stickers to make a cool sitcker anno!

No such thing exists, but a couple of coats of clear duracoat/cerakote over the stickers would probably work. Read up on anodizing, it's very different from painting.

[GrAzIaNo]

I kno real anno.is a process but back in the day ppl made nice "anno" on there body's by makeing designs with a lot of stickers...I will try n find a pic to explain.

[GrAzIaNo]