Nox boards

Tselanne · 10-23-2009, 12:42 PM

Hey all,

Since the post count has been light around here, I thought I'd throw this out there....

I've been wanting to pick up a couple nox boards for a while now. I've tried buynox.com and ranjerzproshop.com, but no luck with either store. Buynox just emailed me back today and said they haven't made them in a while.

Might anybody have a suggestion on where to get 'em?

My wtb thread over on ICD has been up for months now.... no luck yet.

oldcopul8r · 10-23-2009, 02:08 PM

I just got lucky about a week ago. A friend and I swapped boards, (I got his NOX) sent it in for a reflash,(turnaround was SPEEDY). Now my fs8 rocks!!
I got another fs8 last Sunday and I'd love to find another NOX board for it and my promaster. If we all get together and whine enough, maybe someone would make a good aftermarket board for the ICD markers. (God knows you can't get a response from vaporworks) Does anybody have some NOX boards layin' around ???!!

pump · 10-23-2009, 11:57 PM

so what does this board do so well, they got reflashing for stock borg boards as well, i dont know why its needed for that, but i hear it does help

but i dono why

dwell, eye delay, and ROF its all the same. could it be eye logic?

DonF · 10-24-2009, 09:38 AM

Who does reflashing for a stock ICD board now??? Nox sure wont I asked

My nox lite reprogramed ICD board is a nice little board lots of improvements just not programmable! I posted a link on ICDO with a step by step article on how to reprogram stock ICD boards but no one has ever done anything me included.

While the ICD Nox reloaded is forever gone - Maybe if we asked Nox as a group like in 20 people with cash in hand to bring back the nox lite?? Its not as good as reloaded but there is no reprogramming its just a very fast board with eye delay/ psp ramping. I think the price was 25 to reprogram the board in 04/05. The outlay for noxlite would be small as they aren't paying for a new run of boards up front just reprogramming the stock nonadjustable boards so there may be a chance we could get them to do it. The ramping and eye delay really make a dud board usable!

oldcopul8r · 10-24-2009, 05:27 PM

Well DonF, if you have volenteered to be the ambasator for our board cause, put me down for TWO boards (Cash in Hand). You may have a lot more pull than me. The NOX dude is very cool and a pleasure to work with, but I don't know if he has the time or inclination to take on a project like this. Please, plead our case with the NOX guy (may be able to get them all sold on ICDO)

DonF · 10-24-2009, 06:39 PM

I will ask again and mention that we may be interested in a group reprogramming. Noxlite was for the non adjustable ICD boards only. I like mine though its like someone programed in the best features and I dont have to mess with it. I have two reloaded boards too, but really the lite suits me just fine.

MuthaFunk · 10-24-2009, 10:14 PM

Does the NOX light have ramping or full auto modes? I have a nox in my FS4 Gen 2 and it has all the adjustments of my Bushmaster Reloaded board but no modes other than semi-auto. Is it a light board?

DonF · 10-24-2009, 11:53 PM

Quote:

Originally Posted by MuthaFunk

Does the NOX light have ramping or full auto modes? I have a nox in my FS4 Gen 2 and it has all the adjustments of my Bushmaster Reloaded board but no modes other than semi-auto. Is it a light board?

Explain what adjustments and take a picture? Nox light has NO adjustments it was available in semi or PSP Ramping the option was programed you cant change it - it is a factory ICD board with different programming.

MuthaFunk · 10-25-2009, 09:24 AM

These are the settings I have.

http://www.freewebs.com/thcgunsmoke/tech/Nox.htm

I guess it's a NOX Original.

DonF · 10-25-2009, 09:58 AM

You might call and see if it can be upgraded with the programming they are offering for the newer boards? That would be even better. I'm sending in my reloaded boards soon. It only takes a day to get there in the mail, I'm close!

pump · 10-25-2009, 05:31 PM

wow i guess i know where Bob Long got the idea for his Marq from
it looks just like an FS

i wonder.....could it be modded to use those marq internals for better efficiency

DonF · 10-25-2009, 08:40 PM

Quote:

Originally Posted by pump

wow i guess i know where Bob Long got the idea for his Marq from
it looks just like an FS

i wonder.....could it be modded to use those marq internals for better efficiency

I must have missed somthing?

pump · 10-25-2009, 09:12 PM

the link showed FS taking out of the body, very marqesque

Tzarector · 10-26-2009, 08:27 PM

maybe its time to go pump's route and use MD boards in bushies. I just ordered some wires from destructive customs. waiting to get them so i can setup my 06 borg board. =P

DonF · 10-26-2009, 08:45 PM

Well I sent an email to nox asking about bringing back nox lite. They usually respond quickly, this time nothing- so that's probably not just no, but a !@#%$!! NO

Tselanne · 10-27-2009, 10:34 AM

Quote:

Originally Posted by Tzarector

maybe its time to go pump's route and use MD boards in bushies. I just ordered some wires from destructive customs. waiting to get them so i can setup my 06 borg board. =P

Are those nice and small like the nox boards?

Don, I'm trying to find the reloaded version.... I really wish they'd do another run. Sounds like we'd have quite a few buyers.

Tzarector · 10-27-2009, 02:00 PM

Quote:

Originally Posted by Tselanne

Are those nice and small like the nox boards?

Don, I'm trying to find the reloaded version.... I really wish they'd do another run. Sounds like we'd have quite a few buyers.

I accidentally left the borg board at my parents house but I'll try to get pics comparing the Nox board vs the MD 06 board asap.

I think buynox have Nox MD boards for 75. Thats a lil pricey. I'm in the market for another Nox board myself. Got a few projects underwraps. =P

pump · 10-27-2009, 04:53 PM

a board that has a fixed Micro Switch, LED, and on off switch eliminates 6 wires

now to find one that fits into the T2 or the stock 2K3 frames is the trick

i need to see a Tadao Mac Dev board

Litespeed · 10-27-2009, 10:33 PM

Pump, as usual, has something up his sleeve. I am watching very interestingly.

I like my Nox board, fits nicely in my AcidCustom or T2, but mine has eye issues. BuyNox will not respond to my e-mails.

pump · 10-28-2009, 12:12 AM

hehehehe and that is to make it so the B2K can use almost any frame and so you can almost use any board

well i dono how lucky i will get but i got my fingers crossed

Tselanne · 10-28-2009, 09:06 AM

Quote:

Originally Posted by Litespeed

Pump, as usual, has something up his sleeve. I am watching very interestingly.

I like my Nox board, fits nicely in my AcidCustom or T2, but mine has eye issues. BuyNox will not respond to my e-mails.

Curious to know what you come up with Pump. I just want a board that is easy to program on the field, fits in the t2, and has some cool features.

Wierd. I emailed them this week Monday asking if they still had reloaded boards, and they responded the same day (answer was, "no, we haven't made those for a long time"). They also mentioned they would look at my non-working board, but they haven't responded to my 2nd email from Monday...